agora inbox for pgsql-hackers@postgresql.orghelp / color / mirror / Atom feed
[PATCH v50 1/8] Make index_concurrently_create_copy more general 1866+ messages / 2 participants [nested] [flat]
* [PATCH v50 1/8] Make index_concurrently_create_copy more general @ 2026-03-24 18:02 Álvaro Herrera <alvherre@kurilemu.de> 0 siblings, 0 replies; 1866+ messages in thread From: Álvaro Herrera @ 2026-03-24 18:02 UTC (permalink / raw) Add a 'boolean concurrent' option, and make it work for both cases. Also rename it to index_create_copy. This allows it to be reused for other purposes -- specifically, for REPACK CONCURRENTLY. With the CONCURRENTLY option, REPACK cannot simply swap the heap file and rebuild its indexes. Instead, it needs to build a separate set of indexes (including system catalog entries) *before* the actual swap, to reduce the time AccessExclusiveLock needs to be held for. This approach is different from what CREATE INDEX CONCURRENTLY does. Per a suggestion from Mihail Nikalayeu. Author: Antonin Houska <ah@cybertec.at> Discussion: https://postgr.es/m/41104.1754922120@localhost --- src/backend/catalog/index.c | 41 ++++++++++++++++++++++---------- src/backend/commands/indexcmds.c | 9 +++---- src/include/catalog/index.h | 7 +++--- 3 files changed, 36 insertions(+), 21 deletions(-) diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c index 1ccfa687f05..e418d67e8e4 100644 --- a/src/backend/catalog/index.c +++ b/src/backend/catalog/index.c @@ -1289,17 +1289,17 @@ index_create(Relation heapRelation, } /* - * index_concurrently_create_copy + * index_create_copy * - * Create concurrently an index based on the definition of the one provided by - * caller. The index is inserted into catalogs and needs to be built later - * on. This is called during concurrent reindex processing. + * Create an index based on the definition of the one provided by caller. The + * index is inserted into catalogs. If 'concurrently' is TRUE, it needs to be + * built later on; otherwise it's built immediately. * * "tablespaceOid" is the tablespace to use for this index. */ Oid -index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, - Oid tablespaceOid, const char *newName) +index_create_copy(Relation heapRelation, bool concurrently, + Oid oldIndexId, Oid tablespaceOid, const char *newName) { Relation indexRelation; IndexInfo *oldInfo, @@ -1318,6 +1318,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, List *indexColNames = NIL; List *indexExprs = NIL; List *indexPreds = NIL; + int flags = 0; indexRelation = index_open(oldIndexId, RowExclusiveLock); @@ -1328,7 +1329,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, * Concurrent build of an index with exclusion constraints is not * supported. */ - if (oldInfo->ii_ExclusionOps != NULL) + if (oldInfo->ii_ExclusionOps != NULL && concurrently) ereport(ERROR, (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), errmsg("concurrent index creation for exclusion constraints is not supported"))); @@ -1384,9 +1385,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, } /* - * Build the index information for the new index. Note that rebuild of - * indexes with exclusion constraints is not supported, hence there is no - * need to fill all the ii_Exclusion* fields. + * Build the index information for the new index. */ newInfo = makeIndexInfo(oldInfo->ii_NumIndexAttrs, oldInfo->ii_NumIndexKeyAttrs, @@ -1395,11 +1394,24 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, indexPreds, oldInfo->ii_Unique, oldInfo->ii_NullsNotDistinct, - false, /* not ready for inserts */ - true, + !concurrently, /* isready */ + concurrently, /* concurrent */ indexRelation->rd_indam->amsummarizing, oldInfo->ii_WithoutOverlaps); + /* fetch exclusion constraint info if any */ + if (indexRelation->rd_index->indisexclusion) + { + /* + * XXX Beware: we're making newInfo point to oldInfo-owned memory. It + * would be more orthodox to palloc+memcpy, but we don't need that + * here at present. + */ + newInfo->ii_ExclusionOps = oldInfo->ii_ExclusionOps; + newInfo->ii_ExclusionProcs = oldInfo->ii_ExclusionProcs; + newInfo->ii_ExclusionStrats = oldInfo->ii_ExclusionStrats; + } + /* * Extract the list of column names and the column numbers for the new * index information. All this information will be used for the index @@ -1436,6 +1448,9 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, stattargets[i].isnull = isnull; } + if (concurrently) + flags = INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT; + /* * Now create the new index. * @@ -1459,7 +1474,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId, indcoloptions->values, stattargets, reloptionsDatum, - INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT, + flags, 0, true, /* allow table to be a system catalog? */ false, /* is_internal? */ diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c index 373e8234794..cba379810c7 100644 --- a/src/backend/commands/indexcmds.c +++ b/src/backend/commands/indexcmds.c @@ -3989,10 +3989,11 @@ ReindexRelationConcurrently(const ReindexStmt *stmt, Oid relationOid, const Rein tablespaceid = indexRel->rd_rel->reltablespace; /* Create new index definition based on given index */ - newIndexId = index_concurrently_create_copy(heapRel, - idx->indexId, - tablespaceid, - concurrentName); + newIndexId = index_create_copy(heapRel, + true, + idx->indexId, + tablespaceid, + concurrentName); /* * Now open the relation of the new index, a session-level lock is diff --git a/src/include/catalog/index.h b/src/include/catalog/index.h index a38e95bc0eb..ed9e4c37d27 100644 --- a/src/include/catalog/index.h +++ b/src/include/catalog/index.h @@ -101,10 +101,9 @@ extern Oid index_create(Relation heapRelation, #define INDEX_CONSTR_CREATE_REMOVE_OLD_DEPS (1 << 4) #define INDEX_CONSTR_CREATE_WITHOUT_OVERLAPS (1 << 5) -extern Oid index_concurrently_create_copy(Relation heapRelation, - Oid oldIndexId, - Oid tablespaceOid, - const char *newName); +extern Oid index_create_copy(Relation heapRelation, bool concurrently, + Oid oldIndexId, Oid tablespaceOid, + const char *newName); extern void index_concurrently_build(Oid heapRelationId, Oid indexRelationId); -- 2.47.3 --brnevsqjnuzpyok4 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v50-0002-Rename-cluster.c-h-repack.c-h.patch" ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <ah@cybertec.at> 0 siblings, 0 replies; 1866+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 1866+ messages in thread
end of thread, other threads:[~2026-05-06 07:38 UTC | newest] Thread overview: 1866+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-03-24 18:02 [PATCH v50 1/8] Make index_concurrently_create_copy more general Álvaro Herrera <alvherre@kurilemu.de> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <ah@cybertec.at>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox