agora inbox for pgsql-hackers@postgresql.orghelp / color / mirror / Atom feed
[PATCH v1] BackgroundPsql: Fix potential for lost errors on windows 468+ messages / 2 participants [nested] [flat]
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows @ 2025-02-13 15:09 Andres Freund <andres@anarazel.de> 0 siblings, 0 replies; 468+ messages in thread From: Andres Freund @ 2025-02-13 15:09 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- .../perl/PostgreSQL/Test/BackgroundPsql.pm | 55 +++++++++++++++---- 1 file changed, 43 insertions(+), 12 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm index dbfd82e4fac..7e76845307d 100644 --- a/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm +++ b/src/test/perl/PostgreSQL/Test/BackgroundPsql.pm @@ -89,7 +89,8 @@ sub new 'stdin' => '', 'stdout' => '', 'stderr' => '', - 'query_timer_restart' => undef + 'query_timer_restart' => undef, + 'query_cnt' => 1, }; my $run; @@ -219,27 +220,57 @@ sub query my ($self, $query) = @_; my $ret; my $output; + my $query_cnt = $self->{query_cnt}++; + local $Test::Builder::Level = $Test::Builder::Level + 1; - note "issuing query via background psql: $query"; + note "issuing query $query_cnt via background psql: $query"; $self->{timeout}->start() if (defined($self->{query_timer_restart})); # Feed the query to psql's stdin, followed by \n (so psql processes the # line), by a ; (so that psql issues the query, if it doesn't include a ; - # itself), and a separator echoed with \echo, that we can wait on. - my $banner = "background_psql: QUERY_SEPARATOR"; - $self->{stdin} .= "$query\n;\n\\echo $banner\n"; - - pump_until($self->{run}, $self->{timeout}, \$self->{stdout}, qr/$banner/); + # itself), and a separator echoed both with \echo and \warn, that we can + # wait on. + # + # To avoid somehow confusing the separator from separately issued queries, + # and to make it easier to debug, we include a per-psql query counter in + # the separator. + # + # We need both \echo (printing to stdout) and \warn (printing to stderr), + # because on windows we can get data on stdout before seeing data on + # stderr (or vice versa), even if psql printed them in the opposite + # order. We therefore wait on both. + # + # We need to match for the newline, because we try to remove it below, and + # it's possible to consume just the input *without* the newline. In + # interactive psql we emit \r\n, so we need to allow for that. Also need + # to be careful that we don't e.g. match the echoed \echo command, rather + # than its output. + my $banner = "background_psql: QUERY_SEPARATOR $query_cnt"; + my $banner_match = qr/(^|\n)$banner\r?\n/; + $self->{stdin} .= "$query\n;\n\\echo $banner\n\\warn $banner\n"; + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stdout}, qr/$banner_match/); + pump_until( + $self->{run}, $self->{timeout}, + \$self->{stderr}, qr/$banner_match/); die "psql query timed out" if $self->{timeout}->is_expired; + + note "query returned:\n", + explain { + stdout => $self->{stdout}, + stderr => $self->{stderr}, + }; + + # Remove banner from stdout and stderr, our caller doesn't care. The + # first newline is optional, as there would not be one if consuming an + # empty query result. $output = $self->{stdout}; - - # Remove banner again, our caller doesn't care. The first newline is - # optional, as there would not be one if consuming an empty query - # result. - $output =~ s/\n?$banner\n$//s; + $output =~ s/$banner_match//; + $self->{stderr} =~ s/$banner_match//; # clear out output for the next query $self->{stdout} = ''; -- 2.48.1.76.g4e746b1a31.dirty --sno7qfndt3qie53q-- ^ permalink raw reply [nested|flat] 468+ messages in thread
* [PATCH v47 4/9] repack code cleanups @ 2026-03-31 14:48 Álvaro Herrera <alvherre@kurilemu.de> 0 siblings, 0 replies; 468+ messages in thread From: Álvaro Herrera @ 2026-03-31 14:48 UTC (permalink / raw) --- src/backend/commands/cluster.c | 163 +++++++++++---------------------- 1 file changed, 51 insertions(+), 112 deletions(-) diff --git a/src/backend/commands/cluster.c b/src/backend/commands/cluster.c index fd0bfacaae6..c0220cb3380 100644 --- a/src/backend/commands/cluster.c +++ b/src/backend/commands/cluster.c @@ -2459,18 +2459,8 @@ apply_concurrent_changes(BufFile *file, ChangeContext *chgcxt) TupleTableSlot *spilled_tuple; TupleTableSlot *old_update_tuple; TupleTableSlot *ondisk_tuple; - MemoryContext apply_cxt; bool have_old_tuple = false; - - /* - * Use a separate memory context for the tuples and any memory needed to - * process them. - * - * XXX would this be better with GenerationContextCreate? - */ - apply_cxt = AllocSetContextCreate(TopTransactionContext, - "REPACK - apply", - ALLOCSET_DEFAULT_SIZES); + MemoryContext oldcxt; spilled_tuple = MakeSingleTupleTableSlot(RelationGetDescr(rel), &TTSOpsVirtual); @@ -2479,6 +2469,8 @@ apply_concurrent_changes(BufFile *file, ChangeContext *chgcxt) old_update_tuple = MakeSingleTupleTableSlot(RelationGetDescr(rel), &TTSOpsVirtual); + oldcxt = MemoryContextSwitchTo(GetPerTupleMemoryContext(chgcxt->cc_estate)); + while (true) { size_t nread; @@ -2570,14 +2562,15 @@ apply_concurrent_changes(BufFile *file, ChangeContext *chgcxt) else elog(ERROR, "unrecognized kind of change: %d", kind); - MemoryContextReset(apply_cxt); + ResetPerTupleExprContext(chgcxt->cc_estate); } /* Cleanup. */ ExecDropSingleTupleTableSlot(spilled_tuple); ExecDropSingleTupleTableSlot(ondisk_tuple); ExecDropSingleTupleTableSlot(old_update_tuple); - MemoryContextDelete(apply_cxt); + + MemoryContextSwitchTo(oldcxt); } /* @@ -2588,27 +2581,17 @@ static void apply_concurrent_insert(Relation rel, TupleTableSlot *slot, ChangeContext *chgcxt) { - List *recheck; - /* Put the tuple in the table, but make sure it won't be decoded */ table_tuple_insert(rel, slot, GetCurrentCommandId(true), HEAP_INSERT_NO_LOGICAL, NULL); - /* - * Update indexes with this new tuple. Because we're merely replaying an - * action that already happened, we have no use for the recheck list of - * indexes returned, so just free it. XXX or maybe just leave it? - */ - recheck = ExecInsertIndexTuples(chgcxt->cc_rri, - chgcxt->cc_estate, - 0, - slot, - NIL, NULL); - list_free(recheck); - + /* Update indexes with this new tuple. */ + ExecInsertIndexTuples(chgcxt->cc_rri, + chgcxt->cc_estate, + 0, + slot, + NIL, NULL); pgstat_progress_incr_param(PROGRESS_REPACK_HEAP_TUPLES_INSERTED, 1); - - ResetPerTupleExprContext(chgcxt->cc_estate); } /* @@ -2624,10 +2607,9 @@ apply_concurrent_update(Relation rel, TupleTableSlot *spilled_tuple, TM_FailureData tmfd; TU_UpdateIndexes update_indexes; TM_Result res; - List *recheck; /* - * Carry out the update, avoiding logical decoding info. + * Carry out the update, skipping logical decoding for it. */ res = table_tuple_update(rel, &(ondisk_tuple->tts_tid), spilled_tuple, GetCurrentCommandId(true), @@ -2646,13 +2628,11 @@ apply_concurrent_update(Relation rel, TupleTableSlot *spilled_tuple, if (update_indexes == TU_Summarizing) flags |= EIIT_ONLY_SUMMARIZING; - recheck = ExecInsertIndexTuples(chgcxt->cc_rri, - chgcxt->cc_estate, - flags, - spilled_tuple, - NIL, NULL); - list_free(recheck); - ResetPerTupleExprContext(chgcxt->cc_estate); + ExecInsertIndexTuples(chgcxt->cc_rri, + chgcxt->cc_estate, + flags, + spilled_tuple, + NIL, NULL); } pgstat_progress_incr_param(PROGRESS_REPACK_HEAP_TUPLES_UPDATED, 1); @@ -2665,10 +2645,7 @@ apply_concurrent_delete(Relation rel, TupleTableSlot *slot) TM_FailureData tmfd; /* - * Delete tuple from the new heap. - * - * Do it like in simple_heap_delete(), except for 'wal_logical' (and - * except for 'wait'). + * Delete tuple from the new heap, skipping logical decoding for it. */ res = table_tuple_delete(rel, &(slot->tts_tid), GetCurrentCommandId(true), @@ -3009,12 +2986,8 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, char relpersistence; bool is_system_catalog; Oid ident_idx_new; - XLogRecPtr wal_insert_ptr, - end_of_wal; - char dummy_rec_data = '\0'; - Relation *ind_refs, - *ind_refs_p; - int nind; + XLogRecPtr end_of_wal; + List *indexrels; ChangeContext chgcxt; /* Like in cluster_rel(). */ @@ -3041,24 +3014,23 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, */ ind_oids_new = build_new_indexes(NewHeap, OldHeap, ind_oids_old); - /* Find "identity index" on the new relation. */ + /* + * The identity index in the new relation appears in the same relative + * position as the corresponding index in the old relation. Find it. + */ ident_idx_new = InvalidOid; - forboth(lc, ind_oids_old, lc2, ind_oids_new) + foreach_oid(ind_old, ind_oids_old) { - Oid ind_old = lfirst_oid(lc); - Oid ind_new = lfirst_oid(lc2); - if (identIdx == ind_old) { - ident_idx_new = ind_new; + ident_idx_new = list_nth_oid(ind_oids_new, + foreach_current_index(ind_old)); break; } } - - /* Should not happen, given our lock on the old relation. */ if (!OidIsValid(ident_idx_new)) - ereport(ERROR, - errmsg("identity index missing on the new relation")); + elog(ERROR, "could not find index matching \"%s\" at the new relation", + get_rel_name(identIdx)); /* Gather information to apply concurrent changes. */ initialize_change_context(&chgcxt, NewHeap, ident_idx_new); @@ -3074,8 +3046,7 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, * incomplete page; see GetInsertRecPtr), to minimize the amount of data * we need to flush while holding exclusive lock on the source table. */ - wal_insert_ptr = GetInsertRecPtr(); - XLogFlush(wal_insert_ptr); + XLogFlush(GetXLogInsertRecPtr()); end_of_wal = GetFlushRecPtr(NULL); /* @@ -3094,10 +3065,9 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, /* * Lock all indexes now, not only the clustering one: all indexes need to * have their files swapped. While doing that, store their relation - * references in an array, to handle predicate locks below. + * references in a zero-terminated array, to handle predicate locks below. */ - ind_refs_p = ind_refs = palloc_array(Relation, list_length(ind_oids_old)); - nind = 0; + indexrels = NIL; foreach_oid(ind_oid, ind_oids_old) { Relation index; @@ -3105,16 +3075,11 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, index = index_open(ind_oid, AccessExclusiveLock); /* - * TODO 1) Do we need to check if ALTER INDEX was executed since the - * new index was created in build_new_indexes()? 2) Specifically for - * the clustering index, should check_index_is_clusterable() be called - * here? (Not sure about the latter: ShareUpdateExclusiveLock on the - * table probably blocks all commands that affect the result of - * check_index_is_clusterable().) + * Some things about the index may have changed before we locked the + * index, such as ALTER INDEX RENAME. We don't need to do anything + * here to absorb those changes in the new index. */ - *ind_refs_p = index; - ind_refs_p++; - nind++; + indexrels = lappend(indexrels, index); } /* @@ -3128,40 +3093,18 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, * Tuples and pages of the old heap will be gone, but the heap will stay. */ TransferPredicateLocksToHeapRelation(OldHeap); - /* The same for indexes. */ - for (int i = 0; i < nind; i++) + foreach_ptr(RelationData, index, indexrels) { - Relation index = ind_refs[i]; - TransferPredicateLocksToHeapRelation(index); - - /* - * References to indexes on the old relation are not needed anymore, - * however locks stay till the end of the transaction. - */ index_close(index, NoLock); } - pfree(ind_refs); + list_free(indexrels); /* - * Flush anything we see in WAL, to make sure that all changes committed - * while we were waiting for the exclusive lock are available for - * decoding. This should not be necessary if all backends had - * synchronous_commit set, but we can't rely on this setting. - * - * Unfortunately, GetInsertRecPtr() may lag behind the actual insert - * position, and GetLastImportantRecPtr() points at the start of the last - * record rather than at the end. Thus the simplest way to determine the - * insert position is to insert a dummy record and use its LSN. - * - * XXX Consider using GetLastImportantRecPtr() and adding the size of the - * last record (plus the total size of all the page headers the record - * spans)? + * Flush WAL again, to make sure that all changes committed while we were + * waiting for the exclusive lock are available for decoding. */ - XLogBeginInsert(); - XLogRegisterData(&dummy_rec_data, 1); - wal_insert_ptr = XLogInsert(RM_XLOG_ID, XLOG_NOOP); - XLogFlush(wal_insert_ptr); + XLogFlush(GetXLogInsertRecPtr()); end_of_wal = GetFlushRecPtr(NULL); /* @@ -3186,10 +3129,7 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, { Oid ind_old = lfirst_oid(lc); Oid ind_new = lfirst_oid(lc2); - Oid mapped_tables[4]; - - /* Zero out possible results from swapped_relation_files */ - memset(mapped_tables, 0, sizeof(mapped_tables)); + Oid mapped_tables[4] = {0}; swap_relation_files(ind_old, ind_new, (old_table_oid == RelationRelationId), @@ -3200,13 +3140,12 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap, mapped_tables); #ifdef USE_ASSERT_CHECKING - /* * Concurrent processing is not supported for system relations, so * there should be no mapped tables. */ for (int i = 0; i < 4; i++) - Assert(mapped_tables[i] == 0); + Assert(!OidIsValid(mapped_tables[i])); #endif } @@ -3256,22 +3195,22 @@ build_new_indexes(Relation NewHeap, Relation OldHeap, List *OldIndexes) pgstat_progress_update_param(PROGRESS_REPACK_PHASE, PROGRESS_REPACK_PHASE_REBUILD_INDEX); - foreach_oid(ind_oid, OldIndexes) + foreach_oid(oldindex, OldIndexes) { - Oid ind_oid_new; + Oid newindex; char *newName; Relation ind; - ind = index_open(ind_oid, ShareUpdateExclusiveLock); + ind = index_open(oldindex, ShareUpdateExclusiveLock); - newName = ChooseRelationName(get_rel_name(ind_oid), + newName = ChooseRelationName(get_rel_name(oldindex), NULL, "repacknew", get_rel_namespace(ind->rd_index->indrelid), false); - ind_oid_new = index_create_copy(NewHeap, false, ind_oid, - ind->rd_rel->reltablespace, newName); - result = lappend_oid(result, ind_oid_new); + newindex = index_create_copy(NewHeap, false, oldindex, + ind->rd_rel->reltablespace, newName); + result = lappend_oid(result, newindex); index_close(ind, NoLock); } -- 2.47.3 --2fxmamo6mu2qbxgv Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v47-0005-Use-BulkInsertState-when-copying-data-to-the-new.patch" ^ permalink raw reply [nested|flat] 468+ messages in thread
end of thread, other threads:[~2026-03-31 14:48 UTC | newest] Thread overview: 468+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2025-02-13 15:09 [PATCH v1] BackgroundPsql: Fix potential for lost errors on windows Andres Freund <andres@anarazel.de> 2026-03-31 14:48 [PATCH v47 4/9] repack code cleanups Álvaro Herrera <alvherre@kurilemu.de>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox