Subject: [PATCH v7a 3/3] ci: Remove support for cirrus-ci based CI

From: Andres Freund <[email-masked]>
Date: Thu, 28 May 2026 13:31:41 -0400

As mentioned in the earlier commit, cirrus-ci has shut down. Therefore remove
all files related to running CI via cirrus. Also update comments / code that
were referencing cirrus-ci.

Discussion: https://postgr.es/m/3ydjipcr7kbss57nvi67noplncqhesl5eyb6wgol4ccjxynspv%40yatlykpribmm
---
 src/bin/pg_combinebackup/t/010_hardlink.pl |   12 +-
 .cirrus.yml                                |   91 --
 src/test/perl/PostgreSQL/Test/Cluster.pm   |    5 +-
 .cirrus.star                               |  143 ---
 .cirrus.tasks.yml                          | 1022 --------------------
 src/tools/ci/ci_macports_packages.sh       |    6 +-
 src/tools/ci/gcp_ram_disk.sh               |   27 -
 7 files changed, 11 insertions(+), 1295 deletions(-)
 delete mode 100644 .cirrus.yml
 delete mode 100644 .cirrus.star
 delete mode 100644 .cirrus.tasks.yml
 delete mode 100755 src/tools/ci/gcp_ram_disk.sh

diff --git a/src/bin/pg_combinebackup/t/010_hardlink.pl b/src/bin/pg_combinebackup/t/010_hardlink.pl
index b6e8a9128af..5fbbe6a923b 100644
--- a/src/bin/pg_combinebackup/t/010_hardlink.pl
+++ b/src/bin/pg_combinebackup/t/010_hardlink.pl
@@ -18,13 +18,13 @@ $primary->append_conf('postgresql.conf', 'autovacuum = off');
 $primary->start;
 
 # Create a couple of tables (~264KB each).
-# Note: Cirrus CI runs some tests with a very small segment size, so, in that
+# Note: CI runs some tests with a very small segment size, so, in that
 # environment, a single table of 264KB would have both a segment with a link
-# count of 1 and also one with a link count of 2. But in a normal installation,
-# segment size is 1GB.  Therefore, we use 2 different tables here: for test_1,
-# all segments (or the only one) will have two hard links; for test_2, the
-# last segment (or the only one) will have 1 hard link, and any others will
-# have 2.
+# count of 1 and also one with a link count of 2. But in a normal
+# installation, segment size is 1GB.  Therefore, we use 2 different tables
+# here: for test_1, all segments (or the only one) will have two hard links;
+# for test_2, the last segment (or the only one) will have 1 hard link, and
+# any others will have 2.
 my $query = <<'EOM';
 CREATE TABLE test_%s AS
     SELECT x.id::bigint,
diff --git a/.cirrus.yml b/.cirrus.yml
deleted file mode 100644
index 3f75852e84e..00000000000
--- a/.cirrus.yml
+++ /dev/null
@@ -1,91 +0,0 @@
-# CI configuration file for CI utilizing cirrus-ci.org
-#
-# For instructions on how to enable the CI integration in a repository and
-# further details, see src/tools/ci/README
-#
-#
-# The actual CI tasks are defined in .cirrus.tasks.yml. To make the compute
-# resources for CI configurable on a repository level, the "final" CI
-# configuration is the combination of:
-#
-# 1) the contents of this file
-#
-# 2) computed environment variables
-#
-#    Used to enable/disable tasks based on the execution environment. See
-#    .cirrus.star: compute_environment_vars()
-#
-# 3) if defined, the contents of the file referenced by the, repository
-#    level, REPO_CI_CONFIG_GIT_URL variable (see
-#    https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted
-#    format)
-#
-#    This allows running tasks in a different execution environment than the
-#    default, e.g. to have sufficient resources for cfbot.
-#
-# 4) .cirrus.tasks.yml
-#
-# This composition is done by .cirrus.star
-
-
-env:
-  # Source of images / containers
-  GCP_PROJECT: pg-ci-images
-  IMAGE_PROJECT: $GCP_PROJECT
-  CONTAINER_REPO: us-docker.pkg.dev/${GCP_PROJECT}/ci
-  DISK_SIZE: 25
-
-
-# Define how to run various types of tasks.
-
-# VMs provided by cirrus-ci. Each user has a limited number of "free" credits
-# for testing.
-cirrus_community_vm_template: &cirrus_community_vm_template
-  compute_engine_instance:
-    image_project: $IMAGE_PROJECT
-    image: family/$IMAGE_FAMILY
-    platform: $PLATFORM
-    cpu: $CPUS
-    disk: $DISK_SIZE
-
-
-default_linux_task_template: &linux_task_template
-  env:
-    PLATFORM: linux
-  <<: *cirrus_community_vm_template
-
-
-default_freebsd_task_template: &freebsd_task_template
-  env:
-    PLATFORM: freebsd
-  <<: *cirrus_community_vm_template
-
-default_netbsd_task_template: &netbsd_task_template
-  env:
-    PLATFORM: netbsd
-  <<: *cirrus_community_vm_template
-
-default_openbsd_task_template: &openbsd_task_template
-  env:
-    PLATFORM: openbsd
-  <<: *cirrus_community_vm_template
-
-
-default_windows_task_template: &windows_task_template
-  env:
-    PLATFORM: windows
-  <<: *cirrus_community_vm_template
-
-
-# macos workers provided by cirrus-ci
-default_macos_task_template: &macos_task_template
-  env:
-    PLATFORM: macos
-  macos_instance:
-    image: $IMAGE
-
-
-# Contents of REPO_CI_CONFIG_GIT_URL, if defined, will be inserted here,
-# followed by the contents .cirrus.tasks.yml. This allows
-# REPO_CI_CONFIG_GIT_URL to override how the task types above will be
-# executed, e.g. using a custom compute account or permanent workers.
diff --git a/src/test/perl/PostgreSQL/Test/Cluster.pm b/src/test/perl/PostgreSQL/Test/Cluster.pm
index 4fcb1f6be56..529f49efee1 100644
--- a/src/test/perl/PostgreSQL/Test/Cluster.pm
+++ b/src/test/perl/PostgreSQL/Test/Cluster.pm
@@ -363,9 +363,8 @@ This tries to connect to the server, to test whether it works or not,,
 so the server is up and running. Otherwise this can return 0 even if
 there's nothing wrong with raw_connect() itself.
 
-Notably, raw_connect() does not work on Unix domain sockets on
-Strawberry perl 5.26.3.1 on Windows, which we use in Cirrus CI images
-as of this writing. It dies with "not implemented on this
+Notably, raw_connect() does not work on Unix domain sockets on at least
+Strawberry perl 5.26.3.1 on Windows. It dies with "not implemented on this
 architecture".
 
 =cut
diff --git a/.cirrus.star b/.cirrus.star
deleted file mode 100644
index e9bb672b959..00000000000
--- a/.cirrus.star
+++ /dev/null
@@ -1,143 +0,0 @@
-"""Additional CI configuration, using the starlark language. See
-https://cirrus-ci.org/guide/programming-tasks/#introduction-into-starlark
-
-See also the starlark specification at
-https://github.com/bazelbuild/starlark/blob/master/spec.md
-
-See also .cirrus.yml and src/tools/ci/README
-"""
-
-load("cirrus", "env", "fs", "re", "yaml")
-
-
-def main():
-    """The main function is executed by cirrus-ci after loading .cirrus.yml and can
-    extend the CI definition further.
-
-    As documented in .cirrus.yml, the final CI configuration is composed of
-
-    1) the contents of .cirrus.yml
-
-    2) computed environment variables
-
-    3) if defined, the contents of the file referenced by the, repository
-       level, REPO_CI_CONFIG_GIT_URL variable (see
-       https://cirrus-ci.org/guide/programming-tasks/#fs for the accepted
-       format)
-
-    4) .cirrus.tasks.yml
-    """
-
-    output = ""
-
-    # 1) is evaluated implicitly
-
-
-    # Add 2)
-    additional_env = compute_environment_vars()
-    env_fmt = """
-###
-# Computed environment variables start here
-###
-{0}
-###
-# Computed environment variables end here
-###
-"""
-    output += env_fmt.format(yaml.dumps({'env': additional_env}))
-
-
-    # Add 3)
-    repo_config_url = env.get("REPO_CI_CONFIG_GIT_URL")
-    if repo_config_url != None:
-        print("loading additional configuration from \"{}\"".format(repo_config_url))
-        output += config_from(repo_config_url)
-    else:
-        output += "\n# REPO_CI_CONFIG_URL was not set\n"
-
-
-    # Add 4)
-    output += config_from(".cirrus.tasks.yml")
-
-
-    return output
-
-
-def compute_environment_vars():
-    cenv = {}
-
-    ###
-    # Some tasks are manually triggered by default because they might use too
-    # many resources for users of free Cirrus credits, but they can be
-    # triggered automatically by naming them in an environment variable e.g.
-    # REPO_CI_AUTOMATIC_TRIGGER_TASKS="task_name other_task" under "Repository
-    # Settings" on Cirrus CI's website.
-
-    default_manual_trigger_tasks = ['mingw', 'netbsd', 'openbsd']
-
-    repo_ci_automatic_trigger_tasks = env.get('REPO_CI_AUTOMATIC_TRIGGER_TASKS', '')
-    for task in default_manual_trigger_tasks:
-        name = 'CI_TRIGGER_TYPE_' + task.upper()
-        if repo_ci_automatic_trigger_tasks.find(task) != -1:
-            value = 'automatic'
-        else:
-            value = 'manual'
-        cenv[name] = value
-    ###
-
-    ###
-    # Parse "ci-os-only:" tag in commit message and set
-    # CI_{$OS}_ENABLED variable for each OS
-
-    # We want to disable SanityCheck if testing just a specific OS. This
-    # shortens push-wait-for-ci cycle time a bit when debugging operating
-    # system specific failures. Just treating it as an OS in that case
-    # suffices.
-
-    operating_systems = [
-      'compilerwarnings',
-      'freebsd',
-      'linux',
-      'macos',
-      'mingw',
-      'netbsd',
-      'openbsd',
-      'sanitycheck',
-      'windows',
-    ]
-    commit_message = env.get('CIRRUS_CHANGE_MESSAGE')
-    match_re = r"(^|.*\n)ci-os-only: ([^\n]+)($|\n.*)"
-
-    # re.match() returns an array with a tuple of (matched-string, match_1, ...)
-    m = re.match(match_re, commit_message)
-    if m and len(m) > 0:
-        os_only = m[0][2]
-        os_only_list = re.split(r'[, ]+', os_only)
-    else:
-        os_only_list = operating_systems
-
-    for os in operating_systems:
-        os_enabled = os in os_only_list
-        cenv['CI_{0}_ENABLED'.format(os.upper())] = os_enabled
-    ###
-
-    return cenv
-
-
-def config_from(config_src):
-    """return contents of config file `config_src`, surrounded by markers
-    indicating start / end of the included file
-    """
-
-    config_contents = fs.read(config_src)
-    config_fmt = """
-
-###
-# contents of config file `{0}` start here
-###
-{1}
-###
-# contents of config file `{0}` end here
-###
-"""
-    return config_fmt.format(config_src, config_contents)
diff --git a/.cirrus.tasks.yml b/.cirrus.tasks.yml
deleted file mode 100644
index 8683d1ae9c7..00000000000
--- a/.cirrus.tasks.yml
+++ /dev/null
@@ -1,1022 +0,0 @@
-# CI configuration file for CI utilizing cirrus-ci.org
-#
-# For instructions on how to enable the CI integration in a repository and
-# further details, see src/tools/ci/README
-#
-#
-# NB: Different tasks intentionally test with different, non-default,
-# configurations, to increase the chance of catching problems. Each task with
-# non-obvious non-default documents their oddity at the top of the task,
-# prefixed by "SPECIAL:".
-
-
-env:
-  # The lower depth accelerates git clone. Use a bit of depth so that
-  # concurrent tasks and retrying older jobs have a chance of working.
-  CIRRUS_CLONE_DEPTH: 500
-  # Useful to be able to analyse what in a script takes long
-  CIRRUS_LOG_TIMESTAMP: true
-
-  CCACHE_MAXSIZE: "250M"
-
-  # target to test, for all but windows
-  CHECK: check-world PROVE_FLAGS=$PROVE_FLAGS
-  CHECKFLAGS: -Otarget
-  PROVE_FLAGS: --timer
-  # Build test dependencies as part of the build step, to see compiler
-  # errors/warnings in one place.
-  MBUILD_TARGET: all testprep
-  MTEST_ARGS: --print-errorlogs --no-rebuild -C build
-  PGCTLTIMEOUT: 120 # avoids spurious failures during parallel tests
-  TEMP_CONFIG: ${CIRRUS_WORKING_DIR}/src/tools/ci/pg_ci_base.conf
-  PG_TEST_EXTRA: kerberos ldap ssl libpq_encryption load_balance oauth
-
-  # Postgres config args for the meson builds, shared between all meson tasks
-  # except the 'SanityCheck' task
-  MESON_COMMON_PG_CONFIG_ARGS: -Dcassert=true -Dinjection_points=true
-
-  # Meson feature flags shared by all meson tasks, except:
-  # SanityCheck: uses almost no dependencies.
-  # Windows - VS: has fewer dependencies than listed here, so defines its own.
-  # Linux: uses the 'auto' feature option to test meson feature autodetection.
-  MESON_COMMON_FEATURES: >-
-    -Dauto_features=disabled
-    -Dldap=enabled
-    -Dssl=openssl
-    -Dtap_tests=enabled
-    -Dplperl=enabled
-    -Dplpython=enabled
-    -Ddocs=enabled
-    -Dicu=enabled
-    -Dlibxml=enabled
-    -Dlibxslt=enabled
-    -Dlz4=enabled
-    -Dpltcl=enabled
-    -Dreadline=enabled
-    -Dzlib=enabled
-    -Dzstd=enabled
-
-
-# What files to preserve in case tests fail
-on_failure_ac: &on_failure_ac
-  log_artifacts:
-    paths:
-      - "**/*.log"
-      - "**/*.diffs"
-      - "**/regress_log_*"
-    type: text/plain
-
-on_failure_meson: &on_failure_meson
-  testrun_artifacts:
-    paths:
-      - "build*/testrun/**/*.log"
-      - "build*/testrun/**/*.diffs"
-      - "build*/testrun/**/regress_log_*"
-    type: text/plain
-
-  # In theory it'd be nice to upload the junit files meson generates, so that
-  # cirrus will nicely annotate the commit. Unfortunately the files don't
-  # contain identifiable file + line numbers right now, so the annotations
-  # don't end up useful. We could probably improve on that with a some custom
-  # conversion script, but ...
-  meson_log_artifacts:
-    path: "build*/meson-logs/*.txt"
-    type: text/plain
-
-
-# To avoid unnecessarily spinning up a lot of VMs / containers for entirely
-# broken commits, have a minimal task that all others depend on.
-#
-# SPECIAL:
-# - Builds with --auto-features=disabled and thus almost no enabled
-#   dependencies
-task:
-  name: SanityCheck
-
-  # If a specific OS is requested, don't run the sanity check. This shortens
-  # push-wait-for-ci cycle time a bit when debugging operating system specific
-  # failures. Uses skip instead of only_if, as cirrus otherwise warns about
-  # only_if conditions not matching.
-  skip: $CI_SANITYCHECK_ENABLED == false
-
-  env:
-    CPUS: 4
-    BUILD_JOBS: 8
-    TEST_JOBS: 8
-    IMAGE_FAMILY: pg-ci-trixie
-    CCACHE_DIR: ${CIRRUS_WORKING_DIR}/ccache_dir
-    # no options enabled, should be small
-    CCACHE_MAXSIZE: "150M"
-
-  # While containers would start up a bit quicker, building is a bit
-  # slower. This way we don't have to maintain a container image.
-  <<: *linux_task_template
-
-  ccache_cache:
-    folder: $CCACHE_DIR
-
-  create_user_script: |
-    useradd -m postgres
-    chown -R postgres:postgres .
-    mkdir -p ${CCACHE_DIR}
-    chown -R postgres:postgres ${CCACHE_DIR}
-    echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf
-    su postgres -c "ulimit -l -H && ulimit -l -S"
-    # Can't change container's kernel.core_pattern. Postgres user can't write
-    # to / normally. Change that.
-    chown root:postgres /
-    chmod g+rwx /
-
-  configure_script: |
-    su postgres <<-EOF
-      set -e
-      meson setup \
-        --buildtype=debug \
-        --auto-features=disabled \
-        -Ddefault_library=shared \
-        -Dtap_tests=enabled \
-        build
-    EOF
-  build_script: |
-    su postgres <<-EOF
-      set -e
-      ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}
-    EOF
-  upload_caches: ccache
-
-  # Run a minimal set of tests. The main regression tests take too long for
-  # this purpose. For now this is a random quick pg_regress style test, and a
-  # tap test that exercises both a frontend binary and the backend.
-  test_minimal_script: |
-    su postgres <<-EOF
-      set -e
-      ulimit -c unlimited
-      meson test $MTEST_ARGS --suite setup
-      meson test $MTEST_ARGS --num-processes ${TEST_JOBS} \
-        cube/regress pg_ctl/001_start_stop
-    EOF
-
-  on_failure:
-    <<: *on_failure_meson
-    cores_script: |
-      mkdir -m 770 /tmp/cores
-      find / -maxdepth 1 -type f -name 'core*' -exec mv '{}' /tmp/cores/ \;
-      src/tools/ci/cores_backtrace.sh linux /tmp/cores
-
-
-# SPECIAL:
-# - Uses postgres specific CPPFLAGS that increase test coverage
-# - Specifies configuration options that test reading/writing/copying of node trees
-# - Specifies debug_parallel_query=regress, to catch related issues during CI
-# - Also runs tests against a running postgres instance, see test_running_script
-task:
-  name: FreeBSD - Meson
-
-  env:
-    CPUS: 4
-    BUILD_JOBS: 4
-    TEST_JOBS: 8
-    IMAGE_FAMILY: pg-ci-freebsd
-    DISK_SIZE: 50
-
-    CCACHE_DIR: /tmp/ccache_dir
-    CPPFLAGS: -DRELCACHE_FORCE_RELEASE -DENFORCE_REGRESSION_TEST_NAME_RESTRICTIONS
-    CFLAGS: -Og -ggdb
-
-    # Several buildfarm animals enable these options. Without testing them
-    # during CI, it would be easy to cause breakage on the buildfarm with CI
-    # passing.
-    PG_TEST_INITDB_EXTRA_OPTS: >-
-      -c debug_copy_parse_plan_trees=on
-      -c debug_write_read_parse_plan_trees=on
-      -c debug_raw_expression_coverage_test=on
-      -c debug_parallel_query=regress
-    PG_TEST_PG_UPGRADE_MODE: --link
-
-    MESON_FEATURES: >-
-      -Ddtrace=enabled
-      -Dgssapi=enabled
-      -Dlibcurl=enabled
-      -Dnls=enabled
-      -Dpam=enabled
-      -Dtcl_version=tcl86
-      -Duuid=bsd
-
-  <<: *freebsd_task_template
-
-  depends_on: SanityCheck
-  only_if: $CI_FREEBSD_ENABLED
-
-  sysinfo_script: |
-    id
-    uname -a
-    ulimit -a -H && ulimit -a -S
-    export
-
-  ccache_cache:
-    folder: $CCACHE_DIR
-  setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh
-  create_user_script: |
-    pw useradd postgres
-    chown -R postgres:postgres .
-    mkdir -p ${CCACHE_DIR}
-    chown -R postgres:postgres ${CCACHE_DIR}
-  setup_core_files_script: |
-    mkdir -m 770 /tmp/cores
-    chown root:postgres /tmp/cores
-    sysctl kern.corefile='/tmp/cores/%N.%P.core'
-  setup_additional_packages_script: |
-    #pkg install -y ...
-
-  # NB: Intentionally build without -Dllvm. The freebsd image size is already
-  # large enough to make VM startup slow, and even without llvm freebsd
-  # already takes longer than other platforms except for windows.
-  configure_script: |
-    su postgres <<-EOF
-      set -e
-      meson setup \
-        ${MESON_COMMON_PG_CONFIG_ARGS} \
-        --buildtype=debug \
-        -Dextra_lib_dirs=/usr/local/lib -Dextra_include_dirs=/usr/local/include/ \
-        ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \
-        build
-    EOF
-  build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}'
-  upload_caches: ccache
-
-  test_world_script: |
-    su postgres <<-EOF
-      set -e
-      ulimit -c unlimited
-      meson test $MTEST_ARGS --num-processes ${TEST_JOBS}
-    EOF
-
-  # test runningcheck, freebsd chosen because it's currently fast enough
-  test_running_script: |
-    su postgres <<-EOF
-      set -e
-      ulimit -c unlimited
-      meson test $MTEST_ARGS --quiet --suite setup
-      export LD_LIBRARY_PATH="$(pwd)/build/tmp_install/usr/local/pgsql/lib/:$LD_LIBRARY_PATH"
-      mkdir -p build/testrun
-      build/tmp_install/usr/local/pgsql/bin/initdb -N build/runningcheck --no-instructions -A trust
-      echo "include '$(pwd)/src/tools/ci/pg_ci_base.conf'" >> build/runningcheck/postgresql.conf
-      build/tmp_install/usr/local/pgsql/bin/pg_ctl -c -o '-c fsync=off' -D build/runningcheck -l build/testrun/runningcheck.log start
-      meson test $MTEST_ARGS --num-processes ${TEST_JOBS} --setup running
-      build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop
-    EOF
-
-  on_failure:
-    # if the server continues running, it often causes cirrus-ci to fail
-    # during upload, as it doesn't expect artifacts to change size
-    stop_running_script: |
-      su postgres <<-EOF
-        set -e
-        build/tmp_install/usr/local/pgsql/bin/pg_ctl -D build/runningcheck stop || true
-      EOF
-    <<: *on_failure_meson
-    cores_script: src/tools/ci/cores_backtrace.sh freebsd /tmp/cores
-
-
-task:
-  depends_on: SanityCheck
-
-  env:
-    # Below are experimentally derived to be a decent choice.
-    CPUS: 4
-    BUILD_JOBS: 8
-    TEST_JOBS: 8
-
-    # Default working directory is /tmp, but its total size (1.2 GB) is not
-    # enough, so different working and cache directory are set.
-    CIRRUS_WORKING_DIR: /home/postgres/postgres
-    CCACHE_DIR: /home/postgres/cache
-
-    PATH: /usr/sbin:$PATH
-    CORE_DUMP_DIR: /var/crash
-
-  matrix:
-    - name: NetBSD - Meson
-      # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star
-      trigger_type: $CI_TRIGGER_TYPE_NETBSD
-      only_if: $CI_NETBSD_ENABLED
-      env:
-        OS_NAME: netbsd
-        IMAGE_FAMILY: pg-ci-netbsd-postgres
-        PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/pkg/lib/pkgconfig'
-        # initdb fails with: 'invalid locale settings' error on NetBSD.
-        # Force 'LANG' and 'LC_*' variables to be 'C'.
-        # See https://postgr.es/m/2490325.1734471752%40sss.pgh.pa.us
-        LANG: "C"
-        LC_ALL: "C"
-        # -Duuid is not set for the NetBSD, see the comment below, above
-        # configure_script, for more information.
-        MESON_FEATURES: >-
-          -Dgssapi=enabled
-          -Dlibcurl=enabled
-          -Dnls=enabled
-          -Dpam=enabled
-
-      setup_additional_packages_script: |
-        #pkgin -y install ...
-      <<: *netbsd_task_template
-
-    - name: OpenBSD - Meson
-      # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star
-      trigger_type: $CI_TRIGGER_TYPE_OPENBSD
-      only_if: $CI_OPENBSD_ENABLED
-      env:
-        OS_NAME: openbsd
-        IMAGE_FAMILY: pg-ci-openbsd-postgres
-        PKGCONFIG_PATH: '/usr/lib/pkgconfig:/usr/local/lib/pkgconfig'
-        CORE_DUMP_EXECUTABLE_DIR: $CIRRUS_WORKING_DIR/build/tmp_install/usr/local/pgsql/bin
-
-        MESON_FEATURES: >-
-          -Dbsd_auth=enabled
-          -Dlibcurl=enabled
-          -Dtcl_version=tcl86
-          -Duuid=e2fs
-
-      setup_additional_packages_script: |
-        #pkg_add -I ...
-      # Always core dump to ${CORE_DUMP_DIR}
-      set_core_dump_script: sysctl -w kern.nosuidcoredump=2
-      <<: *openbsd_task_template
-
-  sysinfo_script: |
-    locale
-    id
-    uname -a
-    ulimit -a -H && ulimit -a -S
-    env
-
-  ccache_cache:
-    folder: $CCACHE_DIR
-  setup_ram_disk_script: src/tools/ci/gcp_ram_disk.sh
-  create_user_script: |
-    useradd postgres
-    chown -R postgres:users /home/postgres
-    mkdir -p ${CCACHE_DIR}
-    chown -R postgres:users ${CCACHE_DIR}
-  setup_core_files_script: |
-    mkdir -p ${CORE_DUMP_DIR}
-    chmod -R 770 ${CORE_DUMP_DIR}
-    chown -R postgres:users ${CORE_DUMP_DIR}
-
-  # -Duuid=bsd is not set since 'bsd' uuid option
-  # is not working on NetBSD & OpenBSD. See
-  # https://www.postgresql.org/message-id/[email-masked]
-  # And other uuid options are not available on NetBSD.
-  configure_script: |
-    su postgres <<-EOF
-      set -e
-      meson setup \
-        ${MESON_COMMON_PG_CONFIG_ARGS} \
-        --buildtype=debugoptimized \
-        --pkg-config-path ${PKGCONFIG_PATH} \
-        ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \
-        build
-    EOF
-
-  build_script: su postgres -c 'ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}'
-  upload_caches: ccache
-
-  test_world_script: |
-    su postgres <<-EOF
-      set -e
-      ulimit -c unlimited
-      meson test $MTEST_ARGS --num-processes ${TEST_JOBS}
-    EOF
-
-  on_failure:
-    <<: *on_failure_meson
-    cores_script: |
-      # Although we try to configure the OS to core dump inside
-      # ${CORE_DUMP_DIR}, they may not obey this. So, move core files to the
-      # ${CORE_DUMP_DIR} directory.
-      find build/ -type f -name '*.core' -exec mv '{}' ${CORE_DUMP_DIR} \;
-      src/tools/ci/cores_backtrace.sh ${OS_NAME} ${CORE_DUMP_DIR} ${CORE_DUMP_EXECUTABLE_DIR}
-
-
-# configure feature flags, shared between the task running the linux tests and
-# the CompilerWarnings task
-LINUX_CONFIGURE_FEATURES: &LINUX_CONFIGURE_FEATURES >-
-  --with-gssapi
-  --with-icu
-  --with-ldap
-  --with-libcurl
-  --with-libxml
-  --with-libxslt
-  --with-llvm
-  --with-lz4
-  --with-pam
-  --with-perl
-  --with-python
-  --with-selinux
-  --with-ssl=openssl
-  --with-systemd
-  --with-tcl --with-tclconfig=/usr/lib/tcl8.6/
-  --with-uuid=ossp
-  --with-zstd
-
-
-# Check SPECIAL in the matrix: below
-task:
-  env:
-    CPUS: 4
-    BUILD_JOBS: 4
-    TEST_JOBS: 8 # experimentally derived to be a decent choice
-    IMAGE_FAMILY: pg-ci-trixie
-
-    CCACHE_DIR: /tmp/ccache_dir
-    DEBUGINFOD_URLS: "https://debuginfod.debian.net"
-
-    # Enable a reasonable set of sanitizers. Use the linux task for that, as
-    # it's one of the fastest tasks (without sanitizers). Also several of the
-    # sanitizers work best on linux.
-    #
-    # The overhead of alignment sanitizer is low, undefined behaviour has
-    # moderate overhead. Test alignment sanitizer in the meson task, as it
-    # does both 32 and 64 bit builds and is thus more likely to expose
-    # alignment bugs.
-    #
-    # Address sanitizer in contrast is somewhat expensive. Enable it in the
-    # autoconf task, as the meson task tests both 32 and 64bit.
-    #
-    # disable_coredump=0, abort_on_error=1: for useful backtraces in case of crashes
-    # print_stacktraces=1,verbosity=2, duh
-    # detect_leaks=0: too many uninteresting leak errors in short-lived binaries
-    UBSAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:verbosity=2
-    ASAN_OPTIONS: print_stacktrace=1:disable_coredump=0:abort_on_error=1:detect_leaks=0
-
-    # SANITIZER_FLAGS is set in the tasks below
-    CFLAGS: -Og -ggdb -fno-sanitize-recover=all $SANITIZER_FLAGS
-    CXXFLAGS: $CFLAGS
-    LDFLAGS: $SANITIZER_FLAGS
-    CC: ccache gcc
-    CXX: ccache g++
-
-    LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES
-    LINUX_MESON_FEATURES: >-
-      -Duuid=e2fs
-
-  <<: *linux_task_template
-
-  depends_on: SanityCheck
-  only_if: $CI_LINUX_ENABLED
-
-  ccache_cache:
-    folder: ${CCACHE_DIR}
-
-  sysinfo_script: |
-    id
-    uname -a
-    cat /proc/cmdline
-    ulimit -a -H && ulimit -a -S
-    export
-  create_user_script: |
-    useradd -m postgres
-    chown -R postgres:postgres .
-    mkdir -p ${CCACHE_DIR}
-    chown -R postgres:postgres ${CCACHE_DIR}
-    echo '* - memlock 134217728' > /etc/security/limits.d/postgres.conf
-    su postgres -c "ulimit -l -H && ulimit -l -S"
-  setup_core_files_script: |
-    mkdir -m 770 /tmp/cores
-    chown root:postgres /tmp/cores
-    sysctl kernel.core_pattern='/tmp/cores/%e-%s-%p.core'
-
-  setup_hosts_file_script: |
-    cat >> /etc/hosts <<-EOF
-      127.0.0.1 pg-loadbalancetest
-      127.0.0.2 pg-loadbalancetest
-      127.0.0.3 pg-loadbalancetest
-    EOF
-
-  setup_additional_packages_script: |
-    #apt-get update
-    #DEBIAN_FRONTEND=noninteractive apt-get -y install ...
-
-  matrix:
-    # SPECIAL:
-    # - Uses address sanitizer, sanitizer failures are typically printed in
-    #   the server log
-    # - Configures postgres with a small segment size
-    - name: Linux - Debian Trixie - Autoconf
-
-      env:
-        SANITIZER_FLAGS: -fsanitize=address
-        PG_TEST_PG_COMBINEBACKUP_MODE: --copy-file-range
-
-      # Normally, the "relation segment" code basically has no coverage in our
-      # tests, because we (quite reasonably) don't generate tables large
-      # enough in tests. We've had plenty bugs that we didn't notice due the
-      # code not being exercised much. Thus specify a very small segment size
-      # here. Use a non-power-of-two segment size, given we currently allow
-      # that.
-      configure_script: |
-        su postgres <<-EOF
-          set -e
-          ./configure \
-            --enable-cassert --enable-injection-points --enable-debug \
-            --enable-tap-tests --enable-nls \
-            --with-segsize-blocks=6 \
-            --with-libnuma \
-            --with-liburing \
-            \
-            ${LINUX_CONFIGURE_FEATURES} \
-            \
-            CLANG="ccache clang"
-        EOF
-      build_script: su postgres -c "make -s -j${BUILD_JOBS} world-bin"
-      upload_caches: ccache
-
-      test_world_script: |
-        su postgres <<-EOF
-          set -e
-          ulimit -c unlimited # default is 0
-          make -s ${CHECK} ${CHECKFLAGS} -j${TEST_JOBS}
-        EOF
-
-      on_failure:
-        <<: *on_failure_ac
-
-    # SPECIAL:
-    # - Uses undefined behaviour and alignment sanitizers, sanitizer failures
-    #   are typically printed in the server log
-    # - Test both 64bit and 32 bit builds
-    # - uses io_method=io_uring
-    # - Uses meson feature autodetection
-    - name: Linux - Debian Trixie - Meson
-
-      env:
-        CCACHE_MAXSIZE: "400M" # tests two different builds
-        SANITIZER_FLAGS: -fsanitize=alignment,undefined
-        PG_TEST_INITDB_EXTRA_OPTS: >-
-          -c io_method=io_uring
-
-      configure_script: |
-        su postgres <<-EOF
-          set -e
-          meson setup \
-            ${MESON_COMMON_PG_CONFIG_ARGS} \
-            --buildtype=debug \
-            ${LINUX_MESON_FEATURES} -Dllvm=enabled \
-            build
-        EOF
-
-      # Also build & test in a 32bit build - it's gotten rare to test that
-      # locally.
-      configure_32_script: |
-        su postgres <<-EOF
-          set -e
-          export CC='ccache gcc -m32'
-          export CXX='ccache g++ -m32'
-          meson setup \
-            ${MESON_COMMON_PG_CONFIG_ARGS} \
-            --buildtype=debug \
-            --pkg-config-path /usr/lib/i386-linux-gnu/pkgconfig/ \
-            -DPERL=perl5.40-i386-linux-gnu \
-            ${LINUX_MESON_FEATURES} -Dlibnuma=disabled \
-            build-32
-        EOF
-
-      build_script: |
-        su postgres <<-EOF
-          set -e
-          ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}
-          ninja -C build -t missingdeps
-        EOF
-
-      build_32_script: |
-        su postgres <<-EOF
-          set -e
-          ninja -C build-32 -j${BUILD_JOBS} ${MBUILD_TARGET}
-          ninja -C build -t missingdeps
-        EOF
-
-      upload_caches: ccache
-
-      test_world_script: |
-        su postgres <<-EOF
-          set -e
-          ulimit -c unlimited
-          meson test $MTEST_ARGS --num-processes ${TEST_JOBS}
-        EOF
-        # so that we don't upload 64bit logs if 32bit fails
-        rm -rf build/
-
-      # There's currently no coverage of icu with LANG=C in the buildfarm. We
-      # can easily provide some here by running one of the sets of tests that
-      # way. Newer versions of python insist on changing the LC_CTYPE away
-      # from C, prevent that with PYTHONCOERCECLOCALE.
-      test_world_32_script: |
-        su postgres <<-EOF
-          set -e
-          ulimit -c unlimited
-          PYTHONCOERCECLOCALE=0 LANG=C meson test $MTEST_ARGS -C build-32 --num-processes ${TEST_JOBS}
-        EOF
-
-      on_failure:
-        <<: *on_failure_meson
-
-  on_failure:
-    cores_script: src/tools/ci/cores_backtrace.sh linux /tmp/cores
-
-
-# NB: macOS is by far the most expensive OS to run CI for, therefore no
-# expensive additional checks should be added.
-#
-# SPECIAL:
-# - Enables --clone for pg_upgrade and pg_combinebackup
-task:
-  name: macOS - Sequoia - Meson
-
-  env:
-    CPUS: 4 # always get that much for cirrusci macOS instances
-    BUILD_JOBS: $CPUS
-    # Test performance regresses noticeably when using all cores. 8 seems to
-    # work OK. See
-    # https://postgr.es/m/20220927040208.l3shfcidovpzqxfh%40awork3.anarazel.de
-    TEST_JOBS: 8
-    IMAGE: ghcr.io/cirruslabs/macos-runner:sequoia
-
-    CIRRUS_WORKING_DIR: ${HOME}/pgsql/
-    CCACHE_DIR: ${HOME}/ccache
-    MACPORTS_CACHE: ${HOME}/macports-cache
-
-    MESON_FEATURES: >-
-      -Dbonjour=enabled
-      -Ddtrace=enabled
-      -Dgssapi=enabled
-      -Dlibcurl=enabled
-      -Dnls=enabled
-      -Duuid=e2fs
-
-    MACOS_PACKAGE_LIST: >-
-      ccache
-      icu
-      kerberos5
-      lz4
-      meson
-      openldap
-      openssl
-      p5.34-io-tty
-      p5.34-ipc-run
-      python312
-      tcl
-      zstd
-
-    CC: ccache cc
-    CXX: ccache c++
-    CFLAGS: -Og -ggdb
-    CXXFLAGS: -Og -ggdb
-
-    PG_TEST_PG_UPGRADE_MODE: --clone
-    PG_TEST_PG_COMBINEBACKUP_MODE: --clone
-
-  <<: *macos_task_template
-
-  depends_on: SanityCheck
-  only_if: $CI_MACOS_ENABLED
-
-  sysinfo_script: |
-    id
-    uname -a
-    ulimit -a -H && ulimit -a -S
-    export
-
-  setup_core_files_script:
-    - mkdir ${HOME}/cores
-    - sudo sysctl kern.corefile="${HOME}/cores/core.%P"
-
-  # Use macports, even though homebrew is installed. The installation
-  # of the additional packages we need would take quite a while with
-  # homebrew, even if we cache the downloads. We can't cache all of
-  # homebrew, because it's already large. So we use macports. To cache
-  # the installation we create a .dmg file that we mount if it already
-  # exists.
-  # XXX: The reason for the direct p5.34* references is that we'd need
-  # the large macport tree around to figure out that p5-io-tty is
-  # actually p5.34-io-tty. Using the unversioned name works, but
-  # updates macports every time.
-  macports_cache:
-    folder: ${MACPORTS_CACHE}
-    fingerprint_script: |
-      # Reinstall packages if the OS major version, the list of the packages
-      # to install or the MacPorts install script changes.
-      sw_vers -productVersion | sed 's/\..*//'
-      echo $MACOS_PACKAGE_LIST
-      md5 src/tools/ci/ci_macports_packages.sh
-    reupload_on_changes: true
-  setup_additional_packages_script: |
-    sh src/tools/ci/ci_macports_packages.sh $MACOS_PACKAGE_LIST
-    # system python doesn't provide headers
-    sudo /opt/local/bin/port select python3 python312
-    # Make macports install visible for subsequent steps
-    echo PATH=/opt/local/sbin/:/opt/local/bin/:$PATH >> $CIRRUS_ENV
-  upload_caches: macports
-
-  ccache_cache:
-    folder: $CCACHE_DIR
-  configure_script: |
-    export PKG_CONFIG_PATH="/opt/local/lib/pkgconfig/"
-    meson setup \
-      ${MESON_COMMON_PG_CONFIG_ARGS} \
-      --buildtype=debug \
-      -Dextra_include_dirs=/opt/local/include \
-      -Dextra_lib_dirs=/opt/local/lib \
-      ${MESON_COMMON_FEATURES} ${MESON_FEATURES} \
-      build
-
-  build_script: ninja -C build -j${BUILD_JOBS} ${MBUILD_TARGET}
-  upload_caches: ccache
-
-  test_world_script: |
-    ulimit -c unlimited # default is 0
-    ulimit -n 1024 # default is 256, pretty low
-    meson test $MTEST_ARGS --num-processes ${TEST_JOBS}
-
-  on_failure:
-    <<: *on_failure_meson
-    cores_script: src/tools/ci/cores_backtrace.sh macos "${HOME}/cores"
-
-
-WINDOWS_ENVIRONMENT_BASE: &WINDOWS_ENVIRONMENT_BASE
-  env:
-    # Half the allowed per-user CPU cores
-    CPUS: 4
-
-    # The default cirrus working dir is in a directory msbuild complains about
-    CIRRUS_WORKING_DIR: "c:/cirrus"
-    # git's tar doesn't deal with drive letters, see
-    # https://postgr.es/m/b6782dc3-a7b0-ed56-175f-f8f54cb08d67%40dunslane.net
-    TAR: "c:/windows/system32/tar.exe"
-    # Avoids port conflicts between concurrent tap test runs
-    PG_TEST_USE_UNIX_SOCKETS: 1
-    PG_REGRESS_SOCK_DIR: "c:/cirrus/"
-    DISK_SIZE: 50
-    IMAGE_FAMILY: pg-ci-windows-ci
-
-  sysinfo_script: |
-    chcp
-    systeminfo
-    powershell -Command get-psdrive -psprovider filesystem
-    set
-
-
-task:
-  name: Windows - Server 2022, VS 2019 - Meson & ninja
-  << : *WINDOWS_ENVIRONMENT_BASE
-
-  env:
-    TEST_JOBS: 8 # wild guess, data based value welcome
-
-    # Cirrus defaults to SetErrorMode(SEM_NOGPFAULTERRORBOX | ...). That
-    # prevents crash reporting from working unless binaries do SetErrorMode()
-    # themselves. Furthermore, it appears that either python or, more likely,
-    # the C runtime has a bug where SEM_NOGPFAULTERRORBOX can very
-    # occasionally *trigger* a crash on process exit - which is hard to debug,
-    # given that it explicitly prevents crash dumps from working...
-    # 0x8001 is SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX
-    CIRRUS_WINDOWS_ERROR_MODE: 0x8001
-
-    MESON_FEATURES:
-      -Dcpp_args=/std:c++20
-      -Dauto_features=disabled
-      -Dldap=enabled
-      -Dssl=openssl
-      -Dtap_tests=enabled
-      -Dplperl=enabled
-      -Dplpython=enabled
-
-  <<: *windows_task_template
-
-  depends_on: SanityCheck
-  only_if: $CI_WINDOWS_ENABLED
-
-  setup_additional_packages_script: |
-    REM choco install -y --no-progress ...
-
-  setup_hosts_file_script: |
-    echo 127.0.0.1 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts
-    echo 127.0.0.2 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts
-    echo 127.0.0.3 pg-loadbalancetest >> c:\Windows\System32\Drivers\etc\hosts
-    type c:\Windows\System32\Drivers\etc\hosts
-
-  configure_script: |
-    vcvarsall x64
-    meson setup --backend ninja %MESON_COMMON_PG_CONFIG_ARGS% --buildtype debug -Db_pch=true -Dextra_lib_dirs=c:\openssl\1.1\lib -Dextra_include_dirs=c:\openssl\1.1\include -DTAR=%TAR% %MESON_FEATURES% build
-
-  build_script: |
-    vcvarsall x64
-    ninja -C build %MBUILD_TARGET%
-    ninja -C build -t missingdeps
-
-  check_world_script: |
-    vcvarsall x64
-    meson test %MTEST_ARGS% --num-processes %TEST_JOBS%
-
-  on_failure:
-    <<: *on_failure_meson
-    crashlog_artifacts:
-      path: "crashlog-*.txt"
-      type: text/plain
-
-
-task:
-  << : *WINDOWS_ENVIRONMENT_BASE
-  name: Windows - Server 2022, MinGW64 - Meson
-
-  # See REPO_CI_AUTOMATIC_TRIGGER_TASKS in .cirrus.star.
-  trigger_type: $CI_TRIGGER_TYPE_MINGW
-
-  depends_on: SanityCheck
-  only_if: $CI_MINGW_ENABLED
-
-  env:
-    TEST_JOBS: 4 # higher concurrency causes occasional failures
-    CCACHE_DIR: C:/msys64/ccache
-    CCACHE_MAXSIZE: "500M"
-    CCACHE_SLOPPINESS: pch_defines,time_macros
-    CCACHE_DEPEND: 1
-    # for some reason mingw plpython cannot find its installation without this
-    PYTHONHOME: C:/msys64/ucrt64
-    # prevents MSYS bash from resetting error mode
-    MSYS: winjitdebug
-    # Start bash in current working directory
-    CHERE_INVOKING: 1
-    BASH: C:\msys64\usr\bin\bash.exe -l
-
-    # Keep -Dnls explicitly disabled, as the number of files it creates causes a
-    # noticeable slowdown.
-    MESON_FEATURES: >-
-      -Dnls=disabled
-
-  <<: *windows_task_template
-
-  ccache_cache:
-    folder: ${CCACHE_DIR}
-
-  setup_additional_packages_script: |
-    REM C:\msys64\usr\bin\pacman.exe -S --noconfirm ...
-
-  mingw_info_script: |
-    %BASH% -c "where gcc"
-    %BASH% -c "gcc --version"
-    %BASH% -c "where perl"
-    %BASH% -c "perl --version"
-
-  configure_script: |
-    %BASH% -c "meson setup %MESON_COMMON_PG_CONFIG_ARGS% -Ddebug=true -Doptimization=g -Db_pch=true %MESON_COMMON_FEATURES% %MESON_FEATURES% -DTAR=%TAR% build"
-
-  build_script: |
-    %BASH% -c "ninja -C build ${MBUILD_TARGET}"
-
-  upload_caches: ccache
-
-  test_world_script: |
-    %BASH% -c "meson test %MTEST_ARGS% --num-processes %TEST_JOBS%"
-
-  on_failure:
-    <<: *on_failure_meson
-    crashlog_artifacts:
-      path: "crashlog-*.txt"
-      type: text/plain
-
-
-task:
-  name: CompilerWarnings
-
-  # To limit unnecessary work only run this once the SanityCheck
-  # succeeds. This is particularly important for this task as we intentionally
-  # use always: to continue after failures.
-  depends_on: SanityCheck
-  only_if: $CI_COMPILERWARNINGS_ENABLED
-
-  env:
-    CPUS: 4
-    BUILD_JOBS: 4
-    IMAGE_FAMILY: pg-ci-trixie
-
-    # Use larger ccache cache, as this task compiles with multiple compilers /
-    # flag combinations
-    CCACHE_MAXSIZE: "1G"
-    CCACHE_DIR: "/tmp/ccache_dir"
-
-    LINUX_CONFIGURE_FEATURES: *LINUX_CONFIGURE_FEATURES
-
-  <<: *linux_task_template
-
-  sysinfo_script: |
-    id
-    uname -a
-    cat /proc/cmdline
-    ulimit -a -H && ulimit -a -S
-    gcc -v
-    clang -v
-    export
-
-  ccache_cache:
-    folder: $CCACHE_DIR
-
-  setup_additional_packages_script: |
-    #apt-get update
-    #DEBIAN_FRONTEND=noninteractive apt-get -y install ...
-
-  ###
-  # Test that code can be built with gcc/clang without warnings
-  ###
-
-  setup_script: echo "COPT=-Werror" > src/Makefile.custom
-
-  # Trace probes have a history of getting accidentally broken. Use the
-  # different compilers to build with different combinations of dtrace on/off
-  # and cassert on/off.
-
-  # gcc, cassert off, dtrace on
-  always:
-    gcc_warning_script: |
-      time ./configure \
-        --cache gcc.cache \
-        --enable-dtrace \
-        ${LINUX_CONFIGURE_FEATURES} \
-        CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} world-bin
-
-  # gcc, cassert on, dtrace off
-  always:
-    gcc_a_warning_script: |
-      time ./configure \
-        --cache gcc.cache \
-        --enable-cassert \
-        ${LINUX_CONFIGURE_FEATURES} \
-        CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} world-bin
-
-  # clang, cassert off, dtrace off
-  always:
-    clang_warning_script: |
-      time ./configure \
-        --cache clang.cache \
-        ${LINUX_CONFIGURE_FEATURES} \
-        CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} world-bin
-
-  # clang, cassert on, dtrace on
-  always:
-    clang_a_warning_script: |
-      time ./configure \
-        --cache clang.cache \
-        --enable-cassert \
-        --enable-dtrace \
-        ${LINUX_CONFIGURE_FEATURES} \
-        CC="ccache clang" CXX="ccache clang++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} world-bin
-
-  # cross-compile to windows
-  always:
-    mingw_cross_warning_script: |
-      time ./configure \
-        --host=x86_64-w64-mingw32ucrt \
-        --enable-cassert \
-        --without-icu \
-        CC="ccache x86_64-w64-mingw32ucrt-gcc" \
-        CXX="ccache x86_64-w64-mingw32ucrt-g++"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} world-bin
-
-  ###
-  # Verify docs can be built
-  ###
-  # XXX: Only do this if there have been changes in doc/ since last build
-  always:
-    docs_build_script: |
-      time ./configure \
-        --cache gcc.cache \
-        CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} -C doc
-
-  ###
-  # Verify headerscheck / cpluspluscheck succeed
-  #
-  # - Run both in same script to increase parallelism, use -k to get result of both
-  # - Use -fmax-errors, as particularly cpluspluscheck can be very verbose
-  ###
-  always:
-    headers_headerscheck_script: |
-      time ./configure \
-        ${LINUX_CONFIGURE_FEATURES} \
-        --cache gcc.cache \
-        --quiet \
-        CC="ccache gcc" CXX="ccache g++" CLANG="ccache clang"
-      make -s -j${BUILD_JOBS} clean
-      time make -s -j${BUILD_JOBS} -k ${CHECKFLAGS} headerscheck cpluspluscheck EXTRAFLAGS='-fmax-errors=10'
-
-  always:
-    upload_caches: ccache
diff --git a/src/tools/ci/ci_macports_packages.sh b/src/tools/ci/ci_macports_packages.sh
index c7c4a1c0c60..304b9b43fd4 100755
--- a/src/tools/ci/ci_macports_packages.sh
+++ b/src/tools/ci/ci_macports_packages.sh
@@ -6,7 +6,7 @@
 # when packages are installed or removed.  Any package this script is
 # not instructed to install, will be removed again.
 #
-# This currently expects to be run in a macos cirrus-ci environment.
+# This currently expects to be run in a macos github actions environment.
 
 set -e
 # set -x
@@ -38,8 +38,8 @@ fi
 
 cache_dmg="macports.hfs.dmg"
 
-if [ "$CIRRUS_CI" != "true" ] && [ "$GITHUB_ACTIONS" != "true" ]; then
-    echo "expect to be called within cirrus-ci or github actions" 1>&2
+if [ "$GITHUB_ACTIONS" != "true" ]; then
+    echo "expect to be called within github actions" 1>&2
     exit 1
 fi
 
diff --git a/src/tools/ci/gcp_ram_disk.sh b/src/tools/ci/gcp_ram_disk.sh
deleted file mode 100755
index 18dbb2037f5..00000000000
--- a/src/tools/ci/gcp_ram_disk.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-# Move working directory into a RAM disk for better performance.
-
-set -e
-set -x
-
-mv $CIRRUS_WORKING_DIR $CIRRUS_WORKING_DIR.orig
-mkdir $CIRRUS_WORKING_DIR
-
-case "`uname`" in
-  FreeBSD|NetBSD)
-    mount -t tmpfs tmpfs $CIRRUS_WORKING_DIR
-    ;;
-  OpenBSD)
-    umount /dev/sd0j # unused /usr/obj partition
-    printf "m j\n\n\nswap\nw\nq\n" | disklabel -E sd0
-    swapon /dev/sd0j
-    # Remove the per-process data segment limit so that mount_mfs can allocate
-    # large memory filesystems. Without this, mount_mfs mmap() may fail with
-    # "Cannot allocate memory" if the requested size exceeds the current
-    # datasize limit.
-    ulimit -d unlimited
-    mount -t mfs -o rw,noatime,nodev,-s=10000000 swap $CIRRUS_WORKING_DIR
-    ;;
-esac
-
-cp -a $CIRRUS_WORKING_DIR.orig/. $CIRRUS_WORKING_DIR/
-- 
2.54.0.380.gc69baaf57b

--duumq7fiwvn25xxn--