agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v9 2/2] wip: report nanoseconds in pg_test_timing 197+ messages / 1 participants [nested] [flat]
* [PATCH v9 2/2] wip: report nanoseconds in pg_test_timing @ 2023-01-16 19:19 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2023-01-16 19:19 UTC (permalink / raw) This commit also updates pg_test_timing's documentation: - compare EXPLAIN (ANALYZE, TIMING ON/OFF) instead of comparing performance of of statement with/without EXPLAIN ANALYZE - explain the 2x overhead (due to two timestamp acquisitions per row) - remove old section about old versions of linux - I couldn't update the numbers, and it's old enough nobody would care --- src/bin/pg_test_timing/pg_test_timing.c | 74 +++++++++------ doc/src/sgml/ref/pgtesttiming.sgml | 117 ++++++++++-------------- 2 files changed, 95 insertions(+), 96 deletions(-) diff --git a/src/bin/pg_test_timing/pg_test_timing.c b/src/bin/pg_test_timing/pg_test_timing.c index c29d6f87629..e20718669a5 100644 --- a/src/bin/pg_test_timing/pg_test_timing.c +++ b/src/bin/pg_test_timing/pg_test_timing.c @@ -19,8 +19,8 @@ static void handle_args(int argc, char *argv[]); static uint64 test_timing(unsigned int duration); static void output(uint64 loop_count); -/* record duration in powers of 2 microseconds */ -long long int histogram[32]; +/* record duration in powers of 2 nanoseconds */ +uint64 histogram[64]; int main(int argc, char *argv[]) @@ -121,35 +121,48 @@ handle_args(int argc, char *argv[]) static uint64 test_timing(unsigned int duration) { - uint64 total_time; - int64 time_elapsed = 0; uint64 loop_count = 0; - uint64 prev, - cur; + instr_time until_time, + total_time; instr_time start_time, - end_time, - temp; - - total_time = duration > 0 ? duration * INT64CONST(1000000) : 0; + end_time; + instr_time cur; INSTR_TIME_SET_CURRENT(start_time); - cur = INSTR_TIME_GET_MICROSEC(start_time); - while (time_elapsed < total_time) + /* + * To reduce loop overhead, check loop condition in instr_time domain. + */ + INSTR_TIME_SET_SECONDS(total_time, duration); + until_time = start_time; + INSTR_TIME_ADD(until_time, total_time); + + cur = start_time; + + while (INSTR_TIME_IS_LT(cur, until_time)) { - int32 diff, - bits = 0; + instr_time temp; + instr_time prev; + int64 diff; + int32 bits = 0; prev = cur; - INSTR_TIME_SET_CURRENT(temp); - cur = INSTR_TIME_GET_MICROSEC(temp); - diff = cur - prev; + INSTR_TIME_SET_CURRENT(cur); + temp = cur; + INSTR_TIME_SUBTRACT(temp, prev); + diff = INSTR_TIME_GET_NANOSEC(temp); /* Did time go backwards? */ - if (diff < 0) + if (unlikely(diff <= 0)) { + /* can't do anything with that measurement */ + if (diff == 0) + { + loop_count++; + continue; + } fprintf(stderr, _("Detected clock going backwards in time.\n")); - fprintf(stderr, _("Time warp: %d ms\n"), diff); + fprintf(stderr, _("Time warp: %lld ns\n"), (long long) diff); exit(1); } @@ -164,8 +177,6 @@ test_timing(unsigned int duration) histogram[bits]++; loop_count++; - INSTR_TIME_SUBTRACT(temp, start_time); - time_elapsed = INSTR_TIME_GET_MICROSEC(temp); } INSTR_TIME_SET_CURRENT(end_time); @@ -173,7 +184,7 @@ test_timing(unsigned int duration) INSTR_TIME_SUBTRACT(end_time, start_time); printf(_("Per loop time including overhead: %0.2f ns\n"), - INSTR_TIME_GET_DOUBLE(end_time) * 1e9 / loop_count); + (INSTR_TIME_GET_DOUBLE(end_time) * NS_PER_S) / loop_count); return loop_count; } @@ -181,9 +192,10 @@ test_timing(unsigned int duration) static void output(uint64 loop_count) { - int64 max_bit = 31, + int64 low_bit = 0, + max_bit = 63, i; - char *header1 = _("< us"); + char *header1 = _("< ns"); char *header2 = /* xgettext:no-c-format */ _("% of total"); char *header3 = _("count"); int len1 = strlen(header1); @@ -194,15 +206,19 @@ output(uint64 loop_count) while (max_bit > 0 && histogram[max_bit] == 0) max_bit--; + /* find lowest bit value */ + while (low_bit < max_bit && histogram[low_bit] == 0) + low_bit++; + printf(_("Histogram of timing durations:\n")); printf("%*s %*s %*s\n", - Max(6, len1), header1, + Max(9, len1), header1, Max(10, len2), header2, Max(10, len3), header3); - for (i = 0; i <= max_bit; i++) - printf("%*ld %*.5f %*lld\n", - Max(6, len1), 1l << i, + for (i = low_bit; i <= max_bit; i++) + printf("%*ld %*.5f %*llu\n", + Max(9, len1), 1l << i, Max(10, len2) - 1, (double) histogram[i] * 100 / loop_count, - Max(10, len3), histogram[i]); + Max(10, len3), (long long unsigned) histogram[i]); } diff --git a/doc/src/sgml/ref/pgtesttiming.sgml b/doc/src/sgml/ref/pgtesttiming.sgml index a5eb3aa25e0..7e0266cf58b 100644 --- a/doc/src/sgml/ref/pgtesttiming.sgml +++ b/doc/src/sgml/ref/pgtesttiming.sgml @@ -93,28 +93,34 @@ PostgreSQL documentation <para> Good results will show most (>90%) individual timing calls take less than - one microsecond. Average per loop overhead will be even lower, below 100 - nanoseconds. This example from an Intel i7-860 system using a TSC clock - source shows excellent performance: + one microsecond (1000 nanoseconds). Average per loop overhead will be even + lower, below 100 nanoseconds. This example from an Intel i9-9880H system + using a TSC clock source shows excellent performance: <screen><![CDATA[ Testing timing overhead for 3 seconds. -Per loop time including overhead: 35.96 ns +Per loop time including overhead: 13.74 ns Histogram of timing durations: - < us % of total count - 1 96.40465 80435604 - 2 3.59518 2999652 - 4 0.00015 126 - 8 0.00002 13 - 16 0.00000 2 + < ns % of total count + 16 97.00221 211857215 + 32 2.99555 6542412 + 64 0.00115 2505 + 128 0.00035 759 + 256 0.00004 78 + 512 0.00000 3 + 1024 0.00000 4 + 2048 0.00034 732 + 4096 0.00000 6 + 8192 0.00000 8 + 16384 0.00019 409 + 32768 0.00018 403 + 65536 0.00000 1 ]]></screen> </para> <para> - Note that different units are used for the per loop time than the - histogram. The loop can have resolution within a few nanoseconds (ns), - while the individual timing calls can only resolve down to one microsecond - (us). + Note that the accuracy of the histogram entries may be lower than the + per loop time. </para> </refsect2> @@ -125,24 +131,25 @@ Histogram of timing durations: When the query executor is running a statement using <command>EXPLAIN ANALYZE</command>, individual operations are timed as well as showing a summary. The overhead of your system can be checked by - counting rows with the <application>psql</application> program: + disabling the per-row timing, using the <literal>TIMING OFF</literal> + option: <screen> -CREATE TABLE t AS SELECT * FROM generate_series(1,100000); -\timing -SELECT COUNT(*) FROM t; -EXPLAIN ANALYZE SELECT COUNT(*) FROM t; +CREATE TABLE t AS SELECT * FROM generate_series(1, 100000); +EXPLAIN (ANALYZE, TIMING OFF) SELECT COUNT(*) FROM t; +EXPLAIN (ANALYZE, TIMING ON) SELECT COUNT(*) FROM t; </screen> </para> <para> - The i7-860 system measured runs the count query in 9.8 ms while - the <command>EXPLAIN ANALYZE</command> version takes 16.6 ms, each - processing just over 100,000 rows. That 6.8 ms difference means the timing - overhead per row is 68 ns, about twice what pg_test_timing estimated it - would be. Even that relatively small amount of overhead is making the fully - timed count statement take almost 70% longer. On more substantial queries, - the timing overhead would be less problematic. + The i9-9880H system measured shows an execution time of 4.116 ms for the + <literal>TIMING OFF</literal> query, and 6.965 ms for the + <literal>TIMING ON</literal>, each processing 100,000 rows. + + That 2.849 ms difference means the timing overhead per row is 28 ns. As + <literal>TIMING ON</literal> measures timestamps twice per row returned by + an executor node, the overhead is very close to what pg_test_timing + estimated it would be. </para> </refsect2> @@ -157,28 +164,31 @@ EXPLAIN ANALYZE SELECT COUNT(*) FROM t; <screen><![CDATA[ # cat /sys/devices/system/clocksource/clocksource0/available_clocksource -tsc hpet acpi_pm +tsc acpi_pm # echo acpi_pm > /sys/devices/system/clocksource/clocksource0/current_clocksource # pg_test_timing -Per loop time including overhead: 722.92 ns +Testing timing overhead for 3 seconds. +Per loop time including overhead: 708.58 ns Histogram of timing durations: - < us % of total count - 1 27.84870 1155682 - 2 72.05956 2990371 - 4 0.07810 3241 - 8 0.01357 563 - 16 0.00007 3 + < ns % of total count + 1024 99.79796 4225270 + 2048 0.15560 6588 + 4096 0.00035 15 + 8192 0.01738 736 + 16384 0.01679 711 + 32768 0.01190 504 ]]></screen> </para> <para> In this configuration, the sample <command>EXPLAIN ANALYZE</command> above - takes 115.9 ms. That's 1061 ns of timing overhead, again a small multiple - of what's measured directly by this utility. That much timing overhead - means the actual query itself is only taking a tiny fraction of the - accounted for time, most of it is being consumed in overhead instead. In - this configuration, any <command>EXPLAIN ANALYZE</command> totals involving - many timed operations would be inflated significantly by timing overhead. + shows an execution time of 148.7 ms. That's 1392 ns of per-row timing + overhead. Taking the two timestamps per row into account, that's again + close to what pg_test_timing estimated. That much timing overhead means + the actual query itself is only taking a tiny fraction of the accounted for + time, most of it is being consumed in overhead instead. In this + configuration, any <command>EXPLAIN ANALYZE</command> totals involving many + timed operations would be inflated significantly by timing overhead. </para> <para> @@ -196,33 +206,6 @@ kern.timecounter.hardware: ACPI-fast -> TSC </screen> </para> - <para> - Other systems may only allow setting the time source on boot. On older - Linux systems the "clock" kernel setting is the only way to make this sort - of change. And even on some more recent ones, the only option you'll see - for a clock source is "jiffies". Jiffies are the older Linux software clock - implementation, which can have good resolution when it's backed by fast - enough timing hardware, as in this example: - -<screen><![CDATA[ -$ cat /sys/devices/system/clocksource/clocksource0/available_clocksource -jiffies -$ dmesg | grep time.c -time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. -time.c: Detected 2400.153 MHz processor. -$ pg_test_timing -Testing timing overhead for 3 seconds. -Per timing duration including loop overhead: 97.75 ns -Histogram of timing durations: - < us % of total count - 1 90.23734 27694571 - 2 9.75277 2993204 - 4 0.00981 3010 - 8 0.00007 22 - 16 0.00000 1 - 32 0.00000 1 -]]></screen></para> - </refsect2> <refsect2> -- 2.38.0 --2e47imhqa2hvpvyc-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 133 ++++++++++++++++++++++++++-- 2 files changed, 125 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fd7e21d96d3..de755fd53ad 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,41 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if (buf_state & BM_IO_IN_PROGRESS) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1724,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1743,38 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (operation->foreign_io) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1860,56 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses + * of an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + */ + if (1 && ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + /* FIXME: probably need to wait if io_method == sync? */ + + *nblocks_progress = 1; + did_start_io = true; + operation->foreign_io = true; + + if (0) + elog(LOG, "using foreign IO path"); + + /* FIXME: trace point */ + + /* + * FIXME: how should this be accounted for in stats? Account as a hit + * for now, quite likely *we* started this IO. + */ + if (persistence == RELPERSISTENCE_TEMP) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + + return true; + } + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1967,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O in progress in another backend (it can't be this + * backend), we want to wait for the outcome: either done, or something + * went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { @@ -1970,6 +2082,7 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) if (VacuumCostActive) VacuumCostBalance += VacuumCostPageMiss * io_buffers_len; + operation->foreign_io = false; *nblocks_progress = io_buffers_len; did_start_io = true; } @@ -5986,6 +6099,8 @@ WaitIO(BufferDesc *buf) */ if (pgaio_wref_valid(&iow)) { + if (0) + elog(LOG, "foreign wait"); pgaio_wref_wait(&iow); /* -- 2.48.1.76.g4e746b1a31.dirty --j4imdtjxqt5tb6mo-- ^ permalink raw reply [nested|flat] 197+ messages in thread
* [PATCH v2 3/3] bufmgr: aio: Prototype for not waiting for already-in-progress IO @ 2025-08-15 15:01 Andres Freund <[email protected]> 0 siblings, 0 replies; 197+ messages in thread From: Andres Freund @ 2025-08-15 15:01 UTC (permalink / raw) Author: Reviewed-by: Discussion: https://postgr.es/m/ Backpatch: --- src/include/storage/bufmgr.h | 1 + src/backend/storage/buffer/bufmgr.c | 150 ++++++++++++++++++++++++++-- 2 files changed, 142 insertions(+), 9 deletions(-) diff --git a/src/include/storage/bufmgr.h b/src/include/storage/bufmgr.h index 41fdc1e7693..7ddb867bc99 100644 --- a/src/include/storage/bufmgr.h +++ b/src/include/storage/bufmgr.h @@ -137,6 +137,7 @@ struct ReadBuffersOperation int flags; int16 nblocks; int16 nblocks_done; + bool foreign_io; PgAioWaitRef io_wref; PgAioReturn io_return; }; diff --git a/src/backend/storage/buffer/bufmgr.c b/src/backend/storage/buffer/bufmgr.c index fe470de63f2..7b245daaf4e 100644 --- a/src/backend/storage/buffer/bufmgr.c +++ b/src/backend/storage/buffer/bufmgr.c @@ -1557,6 +1557,46 @@ ReadBuffersCanStartIOOnce(Buffer buffer, bool nowait) return StartBufferIO(GetBufferDescriptor(buffer - 1), true, nowait); } +/* + * Check if the buffer is already undergoing read AIO. If it is, assign the + * IO's wait reference to operation->io_wref, thereby allowing the caller to + * wait for that IO. + */ +static inline bool +ReadBuffersIOAlreadyInProgress(ReadBuffersOperation *operation, Buffer buffer) +{ + BufferDesc *desc; + uint32 buf_state; + PgAioWaitRef iow; + + pgaio_wref_clear(&iow); + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + if ((buf_state & BM_IO_IN_PROGRESS) && !(buf_state & BM_VALID)) + iow = desc->io_wref; + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + + if ((buf_state & BM_IO_IN_PROGRESS) && !(buf_state & BM_VALID)) + iow = desc->io_wref; + UnlockBufHdr(desc, buf_state); + } + + if (pgaio_wref_valid(&iow)) + { + operation->io_wref = iow; + return true; + } + + return false; +} + /* * Helper for AsyncReadBuffers that tries to get the buffer ready for IO. */ @@ -1689,7 +1729,7 @@ WaitReadBuffers(ReadBuffersOperation *operation) * * we first check if we already know the IO is complete. */ - if (aio_ret->result.status == PGAIO_RS_UNKNOWN && + if ((operation->foreign_io || aio_ret->result.status == PGAIO_RS_UNKNOWN) && !pgaio_wref_check_done(&operation->io_wref)) { instr_time io_start = pgstat_prepare_io_time(track_io_timing); @@ -1708,11 +1748,66 @@ WaitReadBuffers(ReadBuffersOperation *operation) Assert(pgaio_wref_check_done(&operation->io_wref)); } - /* - * We now are sure the IO completed. Check the results. This - * includes reporting on errors if there were any. - */ - ProcessReadBuffersResult(operation); + if (unlikely(operation->foreign_io)) + { + Buffer buffer = operation->buffers[operation->nblocks_done]; + BufferDesc *desc; + uint32 buf_state; + + if (BufferIsLocal(buffer)) + { + desc = GetLocalBufferDescriptor(-buffer - 1); + buf_state = pg_atomic_read_u32(&desc->state); + } + else + { + desc = GetBufferDescriptor(buffer - 1); + buf_state = LockBufHdr(desc); + UnlockBufHdr(desc, buf_state); + } + + if (buf_state & BM_VALID) + { + operation->nblocks_done += 1; + Assert(operation->nblocks_done <= operation->nblocks); + + /* + * Report and track this as a 'hit' for this backend, even + * though it must have started out as a miss in + * PinBufferForBlock(). The other backend (or ourselves, + * as part of a read started earlier) will track this as a + * 'read'. + */ + TRACE_POSTGRESQL_BUFFER_READ_DONE(operation->forknum, + operation->blocknum + operation->nblocks_done, + operation->smgr->smgr_rlocator.locator.spcOid, + operation->smgr->smgr_rlocator.locator.dbOid, + operation->smgr->smgr_rlocator.locator.relNumber, + operation->smgr->smgr_rlocator.backend, + true); + + if (BufferIsLocal(buffer)) + pgBufferUsage.local_blks_hit += 1; + else + pgBufferUsage.shared_blks_hit += 1; + + if (operation->rel) + pgstat_count_buffer_hit(operation->rel); + + pgstat_count_io_op(io_object, io_context, IOOP_HIT, 1, 0); + + if (VacuumCostActive) + VacuumCostBalance += VacuumCostPageHit; + } + } + else + { + /* + * We now are sure the IO completed. Check the results. This + * includes reporting on errors if there were any. + */ + ProcessReadBuffersResult(operation); + } } /* @@ -1798,6 +1893,43 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) io_object = IOOBJECT_RELATION; } + /* + * If AIO is in progress, be it in this backend or another backend, we + * just associate the wait reference with the operation and wait in + * WaitReadBuffers(). This turns out to be important for performance in + * two workloads: + * + * 1) A read stream that has to read the same block multiple times within + * the readahead distance. This can happen e.g. for the table accesses of + * an index scan. + * + * 2) Concurrent scans by multiple backends on the same relation. + * + * If we were to synchronously wait for the in-progress IO, we'd not be + * able to keep enough I/O in flight. + * + * If we do find there is ongoing I/O for the buffer, we set up a 1-block + * ReadBuffersOperation that WaitReadBuffers then can wait on. + * + * It's possible that another backend starts IO on the buffer between this + * check and the ReadBuffersCanStartIO(nowait = false) below. In that case + * we will synchronously wait for the IO below, but the window for that is + * small enough that it won't happen often enough to have a significant + * performance impact. + */ + if (ReadBuffersIOAlreadyInProgress(operation, buffers[nblocks_done])) + { + *nblocks_progress = 1; + operation->foreign_io = true; + + CheckReadBuffersOperation(operation, false); + + + return true; + } + + operation->foreign_io = false; + /* * If zero_damaged_pages is enabled, add the READ_BUFFERS_ZERO_ON_ERROR * flag. The reason for that is that, hopefully, zero_damaged_pages isn't @@ -1855,9 +1987,9 @@ AsyncReadBuffers(ReadBuffersOperation *operation, int *nblocks_progress) /* * Check if we can start IO on the first to-be-read buffer. * - * If an I/O is already in progress in another backend, we want to wait - * for the outcome: either done, or something went wrong and we will - * retry. + * If a synchronous I/O is in progress in another backend (it can't be + * this backend), we want to wait for the outcome: either done, or + * something went wrong and we will retry. */ if (!ReadBuffersCanStartIO(buffers[nblocks_done], false)) { -- 2.48.1.76.g4e746b1a31.dirty --aknbaqiolq3mrqjk-- ^ permalink raw reply [nested|flat] 197+ messages in thread
end of thread, other threads:[~2025-08-15 15:01 UTC | newest] Thread overview: 197+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2023-01-16 19:19 [PATCH v9 2/2] wip: report nanoseconds in pg_test_timing Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v2 3/3] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]> 2025-08-15 15:01 [PATCH v1] bufmgr: aio: Prototype for not waiting for already-in-progress IO Andres Freund <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox