agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v46 5/7] Fix a few problems in index build progress reporting. 376+ messages / 2 participants [nested] [flat]
* [PATCH v46 5/7] Fix a few problems in index build progress reporting. @ 2026-03-27 15:50 Álvaro Herrera <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Álvaro Herrera @ 2026-03-27 15:50 UTC (permalink / raw) First, index_build() should not update the progress when being driven by REPACK, because the progress reporting infractructure cannot handle status of two commands at the same time. So far, REPACK with the CONCURRENTLY option neglected this problem altogether, but even the existing REPACK wasn't consistent enough: even if the 'progress' variable in repack_index() was false, it didn't pass the value to index_build(). Second, REPACK (CONCURRENTLY) should not set PROGRESS_REPACK_PHASE to PROGRESS_REPACK_PHASE_FINAL_CLEANUP in rebuild_relation() because it calls finish_heap_swap() anyway (via rebuild_relation_finish_concurrent()), which does the same thing. --- src/backend/bootstrap/bootstrap.c | 2 +- src/backend/catalog/heap.c | 3 ++- src/backend/catalog/index.c | 22 ++++++++++++++++++---- src/backend/catalog/toasting.c | 3 ++- src/backend/commands/indexcmds.c | 1 + src/include/catalog/index.h | 4 +++- 6 files changed, 27 insertions(+), 8 deletions(-) diff --git a/src/backend/bootstrap/bootstrap.c b/src/backend/bootstrap/bootstrap.c index 68a42de0889..1c8226c6d67 100644 --- a/src/backend/bootstrap/bootstrap.c +++ b/src/backend/bootstrap/bootstrap.c @@ -1181,7 +1181,7 @@ build_indices(void) heap = table_open(ILHead->il_heap, NoLock); ind = index_open(ILHead->il_ind, NoLock); - index_build(heap, ind, ILHead->il_info, false, false); + index_build(heap, ind, ILHead->il_info, false, false, false); index_close(ind, NoLock); table_close(heap, NoLock); diff --git a/src/backend/catalog/heap.c b/src/backend/catalog/heap.c index 5748aa9a1a9..ae6b7cda3dd 100644 --- a/src/backend/catalog/heap.c +++ b/src/backend/catalog/heap.c @@ -3570,7 +3570,8 @@ RelationTruncateIndexes(Relation heapRelation) /* Initialize the index and rebuild */ /* Note: we do not need to re-establish pkey setting */ - index_build(heapRelation, currentIndex, indexInfo, true, false); + index_build(heapRelation, currentIndex, indexInfo, true, false, + true); /* We're done with this index */ index_close(currentIndex, NoLock); diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c index de7182a85a9..cfd33f73f48 100644 --- a/src/backend/catalog/index.c +++ b/src/backend/catalog/index.c @@ -715,6 +715,9 @@ UpdateIndexRelation(Oid indexoid, * already exists. * INDEX_CREATE_PARTITIONED: * create a partitioned index (table must be partitioned) + * INDEX_CREATE_REPORT_PROGRESS: + * update the backend's progress information during index build. + * constr_flags: flags passed to index_constraint_create * (only if INDEX_CREATE_ADD_CONSTRAINT is set) * allow_system_table_mods: allow table to be a system catalog @@ -760,6 +763,7 @@ index_create(Relation heapRelation, bool invalid = (flags & INDEX_CREATE_INVALID) != 0; bool concurrent = (flags & INDEX_CREATE_CONCURRENT) != 0; bool partitioned = (flags & INDEX_CREATE_PARTITIONED) != 0; + bool progress = (flags & INDEX_CREATE_REPORT_PROGRESS) != 0; char relkind; TransactionId relfrozenxid; MultiXactId relminmxid; @@ -1276,7 +1280,8 @@ index_create(Relation heapRelation, } else { - index_build(heapRelation, indexRelation, indexInfo, false, true); + index_build(heapRelation, indexRelation, indexInfo, false, true, + progress); } /* @@ -1438,6 +1443,12 @@ index_create_copy(Relation heapRelation, bool concurrently, stattargets[i].isnull = isnull; } + /* + * Note: The current callers do not need INDEX_CREATE_REPORT_PROGRESS. If + * 'concurrently' is true, there is no build at all. Otherwise the index + * build is a sub-command of REPACK. The current infrastructure does not + * allow two commands to report their progress at the same time. + */ if (concurrently) flags = INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT; @@ -1528,7 +1539,7 @@ index_concurrently_build(Oid heapRelationId, indexInfo->ii_BrokenHotChain = false; /* Now build the index */ - index_build(heapRel, indexRelation, indexInfo, false, true); + index_build(heapRel, indexRelation, indexInfo, false, true, true); /* Roll back any GUC changes executed by index functions */ AtEOXact_GUC(false, save_nestlevel); @@ -3001,6 +3012,7 @@ index_update_stats(Relation rel, * * isreindex indicates we are recreating a previously-existing index. * parallel indicates if parallelism may be useful. + * progress indicates if the backend should update its progress info. * * Note: before Postgres 8.2, the passed-in heap and index Relations * were automatically closed by this routine. This is no longer the case. @@ -3011,7 +3023,8 @@ index_build(Relation heapRelation, Relation indexRelation, IndexInfo *indexInfo, bool isreindex, - bool parallel) + bool parallel, + bool progress) { IndexBuildResult *stats; Oid save_userid; @@ -3062,6 +3075,7 @@ index_build(Relation heapRelation, RestrictSearchPath(); /* Set up initial progress report status */ + if (progress) { const int progress_index[] = { PROGRESS_CREATEIDX_PHASE, @@ -3819,7 +3833,7 @@ reindex_index(const ReindexStmt *stmt, Oid indexId, /* Initialize the index and rebuild */ /* Note: we do not need to re-establish pkey setting */ - index_build(heapRelation, iRel, indexInfo, true, true); + index_build(heapRelation, iRel, indexInfo, true, true, progress); /* Re-allow use of target index */ ResetReindexProcessing(); diff --git a/src/backend/catalog/toasting.c b/src/backend/catalog/toasting.c index 078a1cf5127..73c41360ae9 100644 --- a/src/backend/catalog/toasting.c +++ b/src/backend/catalog/toasting.c @@ -331,7 +331,8 @@ create_toast_table(Relation rel, Oid toastOid, Oid toastIndexOid, BTREE_AM_OID, rel->rd_rel->reltablespace, collationIds, opclassIds, NULL, coloptions, NULL, (Datum) 0, - INDEX_CREATE_IS_PRIMARY, 0, true, true, NULL); + INDEX_CREATE_IS_PRIMARY | INDEX_CREATE_REPORT_PROGRESS, 0, + true, true, NULL); table_close(toast_rel, NoLock); diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c index 83edab38760..c9e22e95515 100644 --- a/src/backend/commands/indexcmds.c +++ b/src/backend/commands/indexcmds.c @@ -1233,6 +1233,7 @@ DefineIndex(ParseState *pstate, flags |= INDEX_CREATE_PARTITIONED; if (stmt->primary) flags |= INDEX_CREATE_IS_PRIMARY; + flags |= INDEX_CREATE_REPORT_PROGRESS; /* * If the table is partitioned, and recursion was declined but partitions diff --git a/src/include/catalog/index.h b/src/include/catalog/index.h index 56a064ef444..a03238304a0 100644 --- a/src/include/catalog/index.h +++ b/src/include/catalog/index.h @@ -71,6 +71,7 @@ extern void index_check_primary_key(Relation heapRel, #define INDEX_CREATE_IF_NOT_EXISTS (1 << 4) #define INDEX_CREATE_PARTITIONED (1 << 5) #define INDEX_CREATE_INVALID (1 << 6) +#define INDEX_CREATE_REPORT_PROGRESS (1 << 7) extern Oid index_create(Relation heapRelation, const char *indexRelationName, @@ -148,7 +149,8 @@ extern void index_build(Relation heapRelation, Relation indexRelation, IndexInfo *indexInfo, bool isreindex, - bool parallel); + bool parallel, + bool progress); extern void validate_index(Oid heapId, Oid indexId, Snapshot snapshot); -- 2.47.3 --mdsv5bdgfjjj6d77 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v46-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index f2759cdbef1..8d9b2b2e370 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) /* Determine the lock mode to use. */ lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0); + if ((params.options & CLUOPT_CONCURRENT) != 0) + { + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose any functionality. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); + } + /* * If a single relation is specified, process it and we're done ... unless * the relation is a partitioned table, in which case we fall through. @@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could deadlock - * if there's an XID already assigned. It would be possible to run in - * a transaction block if we had no XID, but this restriction is - * simpler for users to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --qr3jlalmmcpkiodg Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --r2slln3zpmilwu22 Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack @ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]> 0 siblings, 0 replies; 376+ messages in thread From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw) Currently, executing REPACK (CONCURRENTLY) without a table name inside a transaction block throws the error "REPACK CONCURRENTLY requires explicit table name" instead of the expected transaction block error. This occurs because ExecRepack() validates the parsed options and missing relation before verifying the transaction state. This behavior is inconsistent with other utility commands like VACUUM ,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start of their execution to properly reject execution inside user transactions before validating targets. Add PreventInTransactionBlock to the top of ExecRepack() to enforce the transaction block restriction early. This prevents the user from fixing a missing table error only to immediately hit a transaction block error, and also ensures consistency with rest of the commands. Author: Srinath Reddy Sadipiralla <[email protected]> --- src/backend/commands/repack.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c index d6e446d582d..d4c1f0e7652 100644 --- a/src/backend/commands/repack.c +++ b/src/backend/commands/repack.c @@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel) MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK; ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags; LWLockRelease(ProcArrayLock); + + /* + * Make sure we're not in a transaction block. + * + * The reason is that repack_setup_logical_decoding() could wait + * indefinitely for our XID to complete. (The deadlock detector would + * not recognize it because we'd be waiting for ourselves, i.e. no + * real lock conflict.) It would be possible to run in a transaction + * block if we had no XID, but this restriction is simpler for users + * to understand and we don't lose anything. + */ + PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); } /* @@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid, * replica index OID. */ if (concurrent) - { - /* - * Make sure we're not in a transaction block. - * - * The reason is that repack_setup_logical_decoding() could wait - * indefinitely for our XID to complete. (The deadlock detector would - * not recognize it because we'd be waiting for ourselves, i.e. no - * real lock conflict.) It would be possible to run in a transaction - * block if we had no XID, but this restriction is simpler for users - * to understand and we don't lose anything. - */ - PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)"); - check_repack_concurrently_requirements(OldHeap, &ident_idx); - } /* Check for user-requested abort. */ CHECK_FOR_INTERRUPTS(); -- 2.47.3 --gp2pyozrd5pweboh Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch" ^ permalink raw reply [nested|flat] 376+ messages in thread
end of thread, other threads:[~2026-04-03 15:23 UTC | newest] Thread overview: 376+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-03-27 15:50 [PATCH v46 5/7] Fix a few problems in index build progress reporting. Álvaro Herrera <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]> 2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox