agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v3] Avoid orphaned objects dependencies 112+ messages / 2 participants [nested] [flat]
* [PATCH v3] Avoid orphaned objects dependencies @ 2024-03-29 15:43 Bertrand Drouvot <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Bertrand Drouvot @ 2024-03-29 15:43 UTC (permalink / raw) It's currently possible to create orphaned objects dependencies, for example: Scenario 1: session 1: begin; drop schema schem; session 2: create a function in the schema schem session 1: commit; With the above, the function created in session 2 would be linked to a non existing schema. Scenario 2: session 1: begin; create a function in the schema schem session 2: drop schema schem; session 1: commit; With the above, the function created in session 1 would be linked to a non existing schema. To avoid those scenarios, a new lock (that conflicts with a lock taken by DROP) has been put in place when the dependencies are being recorded. With this in place, the drop schema in scenario 2 would be locked. Also, after locking the object, the patch checks that the object still exists: with this in place session 2 in scenario 1 would be locked and would report an error once session 1 committs (that would not be the case should session 1 abort the transaction). The patch adds a few tests for some dependency cases (that would currently produce orphaned objects): - schema and function (as the above scenarios) - function and type - table and type --- src/backend/catalog/dependency.c | 54 ++++++++++++++ src/backend/catalog/objectaddress.c | 70 +++++++++++++++++++ src/backend/catalog/pg_depend.c | 6 ++ src/include/catalog/dependency.h | 1 + src/include/catalog/objectaddress.h | 1 + src/test/modules/Makefile | 1 + src/test/modules/meson.build | 1 + .../test_dependencies_locks/.gitignore | 3 + .../modules/test_dependencies_locks/Makefile | 14 ++++ .../expected/test_dependencies_locks.out | 49 +++++++++++++ .../test_dependencies_locks/meson.build | 12 ++++ .../specs/test_dependencies_locks.spec | 39 +++++++++++ 12 files changed, 251 insertions(+) 40.5% src/backend/catalog/ 29.6% src/test/modules/test_dependencies_locks/expected/ 18.7% src/test/modules/test_dependencies_locks/specs/ 8.3% src/test/modules/test_dependencies_locks/ diff --git a/src/backend/catalog/dependency.c b/src/backend/catalog/dependency.c index d4b5b2ade1..a49357bbe2 100644 --- a/src/backend/catalog/dependency.c +++ b/src/backend/catalog/dependency.c @@ -1517,6 +1517,60 @@ AcquireDeletionLock(const ObjectAddress *object, int flags) } } +/* + * depLockAndCheckObject + * + * Lock the object that we are about to record a dependency on. + * After it's locked, verify that it hasn't been dropped while we + * weren't looking. If the object has been dropped, this function + * does not return! + */ +void +depLockAndCheckObject(const ObjectAddress *object) +{ + char *object_description; + + /* + * Those don't rely on LockDatabaseObject() when being dropped (see + * AcquireDeletionLock()). Also it looks like they can not produce + * orphaned dependent objects when being dropped. + */ + if (object->classId == RelationRelationId || object->classId == AuthMemRelationId) + return; + + object_description = getObjectDescription(object, true); + + /* assume we should lock the whole object not a sub-object */ + LockDatabaseObject(object->classId, object->objectId, 0, AccessShareLock); + + /* check if object still exists */ + if (!ObjectByIdExist(object, false)) + { + /* + * It might be possible that we are creating it (for example creating + * a composite type while creating a relation), so bypass the syscache + * lookup and use a dirty snaphot instead to cover this scenario. + */ + if (!ObjectByIdExist(object, true)) + { + /* + * If the object has been dropped before we get a chance to get + * its description, then emit a generic error message. That looks + * like a good compromise over extra complexity. + */ + if (object_description) + ereport(ERROR, errmsg("%s does not exist", object_description)); + else + ereport(ERROR, errmsg("a dependent object does not exist")); + } + } + + if (object_description) + pfree(object_description); + + return; +} + /* * ReleaseDeletionLock - release an object deletion lock * diff --git a/src/backend/catalog/objectaddress.c b/src/backend/catalog/objectaddress.c index 7b536ac6fd..c2b873dd81 100644 --- a/src/backend/catalog/objectaddress.c +++ b/src/backend/catalog/objectaddress.c @@ -2590,6 +2590,76 @@ get_object_namespace(const ObjectAddress *address) return oid; } +/* + * ObjectByIdExist + * + * Return whether the given object exists. + * + * Works for most catalogs, if no special processing is needed. + */ +bool +ObjectByIdExist(const ObjectAddress *address, bool use_dirty_snapshot) +{ + HeapTuple tuple; + int cache = -1; + const ObjectPropertyType *property; + + if (!use_dirty_snapshot) + { + property = get_object_property_data(address->classId); + + cache = property->oid_catcache_id; + } + + if (cache >= 0) + { + /* Fetch tuple from syscache. */ + tuple = SearchSysCache1(cache, ObjectIdGetDatum(address->objectId)); + + if (!HeapTupleIsValid(tuple)) + { + return false; + } + + ReleaseSysCache(tuple); + + return true; + } + else + { + Relation rel; + ScanKeyData skey[1]; + SysScanDesc scan; + SnapshotData DirtySnapshot; + Snapshot snapshot; + + if (use_dirty_snapshot) + { + InitDirtySnapshot(DirtySnapshot); + snapshot = &DirtySnapshot; + } + else + snapshot = NULL; + + rel = table_open(address->classId, AccessShareLock); + + ScanKeyInit(&skey[0], + get_object_attnum_oid(address->classId), + BTEqualStrategyNumber, F_OIDEQ, + ObjectIdGetDatum(address->objectId)); + + scan = systable_beginscan(rel, get_object_oid_index(address->classId), true, + snapshot, 1, skey); + + /* we expect exactly one match */ + tuple = systable_getnext(scan); + systable_endscan(scan); + table_close(rel, AccessShareLock); + + return (HeapTupleIsValid(tuple)); + } +} + /* * Return ObjectType for the given object type as given by * getObjectTypeDescription; if no valid ObjectType code exists, but it's a diff --git a/src/backend/catalog/pg_depend.c b/src/backend/catalog/pg_depend.c index f85a898de8..6bb218f5dd 100644 --- a/src/backend/catalog/pg_depend.c +++ b/src/backend/catalog/pg_depend.c @@ -106,6 +106,12 @@ recordMultipleDependencies(const ObjectAddress *depender, if (isObjectPinned(referenced)) continue; + /* + * Acquire a lock and check object still exists while recording the + * dependency. XXX - Should we do so only for DEPENDENCY_NORMAL? + */ + depLockAndCheckObject(referenced); + if (slot_init_count < max_slots) { slot[slot_stored_count] = MakeSingleTupleTableSlot(RelationGetDescr(dependDesc), diff --git a/src/include/catalog/dependency.h b/src/include/catalog/dependency.h index ec654010d4..8915548711 100644 --- a/src/include/catalog/dependency.h +++ b/src/include/catalog/dependency.h @@ -94,6 +94,7 @@ typedef struct ObjectAddresses ObjectAddresses; /* in dependency.c */ extern void AcquireDeletionLock(const ObjectAddress *object, int flags); +extern void depLockAndCheckObject(const ObjectAddress *object); extern void ReleaseDeletionLock(const ObjectAddress *object); diff --git a/src/include/catalog/objectaddress.h b/src/include/catalog/objectaddress.h index 3a70d80e32..04891abcc1 100644 --- a/src/include/catalog/objectaddress.h +++ b/src/include/catalog/objectaddress.h @@ -53,6 +53,7 @@ extern void check_object_ownership(Oid roleid, Node *object, Relation relation); extern Oid get_object_namespace(const ObjectAddress *address); +extern bool ObjectByIdExist(const ObjectAddress *address, bool use_dirty_snapshot); extern bool is_objectclass_supported(Oid class_id); extern const char *get_object_class_descr(Oid class_id); diff --git a/src/test/modules/Makefile b/src/test/modules/Makefile index 256799f520..75f357100f 100644 --- a/src/test/modules/Makefile +++ b/src/test/modules/Makefile @@ -17,6 +17,7 @@ SUBDIRS = \ test_copy_callbacks \ test_custom_rmgrs \ test_ddl_deparse \ + test_dependencies_locks \ test_dsa \ test_dsm_registry \ test_extensions \ diff --git a/src/test/modules/meson.build b/src/test/modules/meson.build index d8fe059d23..60305dcccd 100644 --- a/src/test/modules/meson.build +++ b/src/test/modules/meson.build @@ -16,6 +16,7 @@ subdir('test_bloomfilter') subdir('test_copy_callbacks') subdir('test_custom_rmgrs') subdir('test_ddl_deparse') +subdir('test_dependencies_locks') subdir('test_dsa') subdir('test_dsm_registry') subdir('test_extensions') diff --git a/src/test/modules/test_dependencies_locks/.gitignore b/src/test/modules/test_dependencies_locks/.gitignore new file mode 100644 index 0000000000..bf000faac4 --- /dev/null +++ b/src/test/modules/test_dependencies_locks/.gitignore @@ -0,0 +1,3 @@ +# Generated subdirectories +/log/ +/output_iso diff --git a/src/test/modules/test_dependencies_locks/Makefile b/src/test/modules/test_dependencies_locks/Makefile new file mode 100644 index 0000000000..7491048380 --- /dev/null +++ b/src/test/modules/test_dependencies_locks/Makefile @@ -0,0 +1,14 @@ +# src/test/modules/test_dependencies_locks/Makefile + +ISOLATION = test_dependencies_locks + +ifdef USE_PGXS +PG_CONFIG = pg_config +PGXS := $(shell $(PG_CONFIG) --pgxs) +include $(PGXS) +else +subdir = src/test/modules/test_dependencies_locks +top_builddir = ../../../.. +include $(top_builddir)/src/Makefile.global +include $(top_srcdir)/contrib/contrib-global.mk +endif diff --git a/src/test/modules/test_dependencies_locks/expected/test_dependencies_locks.out b/src/test/modules/test_dependencies_locks/expected/test_dependencies_locks.out new file mode 100644 index 0000000000..d0980f77d5 --- /dev/null +++ b/src/test/modules/test_dependencies_locks/expected/test_dependencies_locks.out @@ -0,0 +1,49 @@ +Parsed test spec with 2 sessions + +starting permutation: s1_begin s1_create_function_in_schema s2_drop_schema s1_commit +step s1_begin: BEGIN; +step s1_create_function_in_schema: CREATE FUNCTION testschema.foo() RETURNS int AS 'select 1' LANGUAGE sql; +step s2_drop_schema: DROP SCHEMA testschema; <waiting ...> +step s1_commit: COMMIT; +step s2_drop_schema: <... completed> +ERROR: cannot drop schema testschema because other objects depend on it + +starting permutation: s2_begin s2_drop_schema s1_create_function_in_schema s2_commit +step s2_begin: BEGIN; +step s2_drop_schema: DROP SCHEMA testschema; +step s1_create_function_in_schema: CREATE FUNCTION testschema.foo() RETURNS int AS 'select 1' LANGUAGE sql; <waiting ...> +step s2_commit: COMMIT; +step s1_create_function_in_schema: <... completed> +ERROR: schema testschema does not exist + +starting permutation: s1_begin s1_create_function_with_type s2_drop_foo_type s1_commit +step s1_begin: BEGIN; +step s1_create_function_with_type: CREATE FUNCTION footype(num foo) RETURNS int AS 'select 1' LANGUAGE sql; +step s2_drop_foo_type: DROP TYPE public.foo; <waiting ...> +step s1_commit: COMMIT; +step s2_drop_foo_type: <... completed> +ERROR: cannot drop type foo because other objects depend on it + +starting permutation: s2_begin s2_drop_foo_type s1_create_function_with_type s2_commit +step s2_begin: BEGIN; +step s2_drop_foo_type: DROP TYPE public.foo; +step s1_create_function_with_type: CREATE FUNCTION footype(num foo) RETURNS int AS 'select 1' LANGUAGE sql; <waiting ...> +step s2_commit: COMMIT; +step s1_create_function_with_type: <... completed> +ERROR: type foo does not exist + +starting permutation: s1_begin s1_create_table_with_type s2_drop_footab_type s1_commit +step s1_begin: BEGIN; +step s1_create_table_with_type: CREATE TABLE tabtype(a footab); +step s2_drop_footab_type: DROP TYPE public.footab; <waiting ...> +step s1_commit: COMMIT; +step s2_drop_footab_type: <... completed> +ERROR: cannot drop type footab because other objects depend on it + +starting permutation: s2_begin s2_drop_footab_type s1_create_table_with_type s2_commit +step s2_begin: BEGIN; +step s2_drop_footab_type: DROP TYPE public.footab; +step s1_create_table_with_type: CREATE TABLE tabtype(a footab); <waiting ...> +step s2_commit: COMMIT; +step s1_create_table_with_type: <... completed> +ERROR: type footab does not exist diff --git a/src/test/modules/test_dependencies_locks/meson.build b/src/test/modules/test_dependencies_locks/meson.build new file mode 100644 index 0000000000..92a978ab93 --- /dev/null +++ b/src/test/modules/test_dependencies_locks/meson.build @@ -0,0 +1,12 @@ +# Copyright (c) 2024, PostgreSQL Global Development Group + +tests += { + 'name': 'test_dependencies_locks', + 'sd': meson.current_source_dir(), + 'bd': meson.current_build_dir(), + 'isolation': { + 'specs': [ + 'test_dependencies_locks', + ], + }, +} diff --git a/src/test/modules/test_dependencies_locks/specs/test_dependencies_locks.spec b/src/test/modules/test_dependencies_locks/specs/test_dependencies_locks.spec new file mode 100644 index 0000000000..fd15bd2a78 --- /dev/null +++ b/src/test/modules/test_dependencies_locks/specs/test_dependencies_locks.spec @@ -0,0 +1,39 @@ +setup +{ + CREATE SCHEMA testschema; + CREATE TYPE public.foo as enum ('one', 'two'); + CREATE TYPE public.footab as enum ('three', 'four'); +} + +teardown +{ + DROP FUNCTION IF EXISTS testschema.foo(); + DROP FUNCTION IF EXISTS footype(num foo); + DROP TABLE IF EXISTS tabtype; + DROP SCHEMA IF EXISTS testschema; + DROP TYPE IF EXISTS public.foo; + DROP TYPE IF EXISTS public.footab; +} + +session "s1" + +step "s1_begin" { BEGIN; } +step "s1_create_function_in_schema" { CREATE FUNCTION testschema.foo() RETURNS int AS 'select 1' LANGUAGE sql; } +step "s1_create_function_with_type" { CREATE FUNCTION footype(num foo) RETURNS int AS 'select 1' LANGUAGE sql; } +step "s1_create_table_with_type" { CREATE TABLE tabtype(a footab); } +step "s1_commit" { COMMIT; } + +session "s2" + +step "s2_begin" { BEGIN; } +step "s2_drop_schema" { DROP SCHEMA testschema; } +step "s2_drop_foo_type" { DROP TYPE public.foo; } +step "s2_drop_footab_type" { DROP TYPE public.footab; } +step "s2_commit" { COMMIT; } + +permutation "s1_begin" "s1_create_function_in_schema" "s2_drop_schema" "s1_commit" +permutation "s2_begin" "s2_drop_schema" "s1_create_function_in_schema" "s2_commit" +permutation "s1_begin" "s1_create_function_with_type" "s2_drop_foo_type" "s1_commit" +permutation "s2_begin" "s2_drop_foo_type" "s1_create_function_with_type" "s2_commit" +permutation "s1_begin" "s1_create_table_with_type" "s2_drop_footab_type" "s1_commit" +permutation "s2_begin" "s2_drop_footab_type" "s1_create_table_with_type" "s2_commit" -- 2.34.1 --+Mfbf1cGg0Kwp7Pc-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <[email protected]> 0 siblings, 0 replies; 112+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 112+ messages in thread
end of thread, other threads:[~2026-07-08 21:39 UTC | newest] Thread overview: 112+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2024-03-29 15:43 [PATCH v3] Avoid orphaned objects dependencies Bertrand Drouvot <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox