agora inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH 5/9] document store_change somewhat more
227+ messages / 2 participants
[nested] [flat]

* [PATCH 5/9] document store_change somewhat more
@ 2026-03-12 15:10  Álvaro Herrera <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Álvaro Herrera @ 2026-03-12 15:10 UTC (permalink / raw)

---
 .../replication/pgoutput_repack/pgoutput_repack.c        | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/src/backend/replication/pgoutput_repack/pgoutput_repack.c b/src/backend/replication/pgoutput_repack/pgoutput_repack.c
index 90f3a8975b9..79fc611b9ff 100644
--- a/src/backend/replication/pgoutput_repack/pgoutput_repack.c
+++ b/src/backend/replication/pgoutput_repack/pgoutput_repack.c
@@ -158,7 +158,14 @@ plugin_change(LogicalDecodingContext *ctx, ReorderBufferTXN *txn,
 	}
 }
 
-/* Store concurrent data change. */
+/*
+ * For each change affecting the table being repacked, we store enough
+ * information about each tuple in it, so that it can be replayed in the
+ * new copy of the table.
+ *
+ * XXX for DELETE and the UPDATE OLD tuples, we could store just the
+ * replication identity instead of the full tuple.
+ */
 static void
 store_change(LogicalDecodingContext *ctx, Relation relation,
 			 ConcurrentChangeKind kind, HeapTuple tuple)
-- 
2.47.3


--pnppmxqkefjd4hu2
Content-Type: text/plain; charset=utf-8
Content-Disposition: attachment;
	filename*0="0006-use-int-instead-of-uint32-for-the-result-of-list_len.noc";
	filename*1="fbot.txt"



^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread

* [PATCH v12a 3/3] ci: macports improvements
@ 2026-06-04 14:17  Andres Freund <[email protected]>
  0 siblings, 0 replies; 227+ messages in thread

From: Andres Freund @ 2026-06-04 14:17 UTC (permalink / raw)

I realized two things:

1) We should save the macports cache before building & running tests, we don't
   want to again start from scratch if the task failed or was cancelled

2) We should use a partial cache match, as it's much faster to start from
   that, than from scratch.

This requires some additional complexity, we now need an explicit restore step
and need to check if the install step succeeded. But it's a very substantial
improvement in runtime, so it's worthwhile.
---
 .github/workflows/pg-ci.yml | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index dea8d95d729..dd4ff4c91d3 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -690,18 +690,23 @@ jobs:
           sudo sysctl kern.corefile="$HOME/cores/core.%P"
 
       - name: "Macports: Compute cache key"
-        id: mpkey
+        id: mp-key
         run: |
           macos_major=$(sw_vers -productVersion | sed 's/\..*//')
           pkglist_hash=$(printf '%s' "$MACOS_PACKAGE_LIST" | md5 -q)
           script_hash=$(md5 -q src/tools/ci/ci_macports_packages.sh)
           echo "key=macports-${macos_major}-${pkglist_hash}-${script_hash}" >> "$GITHUB_OUTPUT"
+          # It's faster to start with a partial cache for the same macos
+          # version than from scratch
+          echo "restore-key=macports-${macos_major}-" >> "$GITHUB_OUTPUT"
 
       - name: "MacPorts: Restore cache"
-        uses: actions/cache@v5
+        id: mp-restore
+        uses: actions/cache/restore@v5
         with:
           path: ${{ env.MACPORTS_CACHE }}
-          key: ${{ steps.mpkey.outputs.key }}
+          key: ${{ steps.mp-key.outputs.key }}
+          restore-keys: ${{ steps.mp-key.outputs.restore-key }}
 
       # Use MacPorts, even though Homebrew is installed. The installation
       # of the additional packages we need would take quite a while with
@@ -714,6 +719,7 @@ jobs:
       # actually p5.34-io-tty. Using the unversioned name works, but
       # updates MacPorts every time.
       - name: "MacPorts: Install dependencies"
+        id: mp-install
         env:
           # Pass token so the script's GitHub API call to list MacPorts
           # releases isn't subject to the 60/h/IP unauthenticated rate
@@ -727,6 +733,18 @@ jobs:
           echo /opt/local/sbin >> "$GITHUB_PATH"
           echo /opt/local/bin >> "$GITHUB_PATH"
 
+      # Save macports before running build / tests, creating macports can be
+      # quite slow, so we don't want to start from scratch in the next run.
+      - name: "MacPorts: Save cache"
+        uses: actions/cache/save@v5
+        # Don't save cache if we had an exact match
+        if: |
+          steps.mp-install.conclusion == 'success' &&
+          steps.mp-restore.outputs.cache-hit != 'true'
+        with:
+          path: ${{ env.MACPORTS_CACHE }}
+          key: ${{ steps.mp-key.outputs.key }}
+
       - name: Configure
         env:
           PKG_CONFIG_PATH: /opt/local/lib/pkgconfig/
-- 
2.54.0.380.gc69baaf57b


--ijwec7zgt2lxep65--





^ permalink  raw  reply  [nested|flat] 227+ messages in thread